[CO] Edelbrock 70001 Performer nitrous kit
#1
Moderator
Thread Starter
iTrader: (14)
Join Date: Mar 2000
Location: Littleton, CO USA
Posts: 43,169
Likes: 0
Received 35 Likes
on
34 Posts
Car: 82 Berlinetta/57 Bel Air
Engine: LS1/LQ4
Transmission: 4L60E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Edelbrock 70001 Performer nitrous kit
Edelbrock 70001 Performer nitrous kit, 50-100 HP, for square bore carb (like Holley 4150). I used it in 2008 to get the '57 quick enough for Pinks All Out (does that make it famous?). Won't work on the engine I'm putting in, so if you are looking for a little extra punch, here's your chance.
Obviously it's used, but I have everything it came with. It's a 10 lb bottle, recertified in April 2010.
I've added a few things I'll include: In-line pressure gauge; pressure gauge on the bottle; purge solenoid; bottle heater (thermostat control); activation relay (allows turning off the system with a switch inside the car). I'll also include the switches I used for power, purge, and bottle heater (nothing fancy, but they worked). I'll even throw in the Holley fuel pressure regulator (pretty important to keep consistent fuel pressure). I used it with E85, so I've got some extra fuel orifices.
Asking $400 for it all. You pay shipping - that bottle is pretty heavy, so consider that.
Respond here, PM, or email me.
Obviously it's used, but I have everything it came with. It's a 10 lb bottle, recertified in April 2010.
I've added a few things I'll include: In-line pressure gauge; pressure gauge on the bottle; purge solenoid; bottle heater (thermostat control); activation relay (allows turning off the system with a switch inside the car). I'll also include the switches I used for power, purge, and bottle heater (nothing fancy, but they worked). I'll even throw in the Holley fuel pressure regulator (pretty important to keep consistent fuel pressure). I used it with E85, so I've got some extra fuel orifices.
Asking $400 for it all. You pay shipping - that bottle is pretty heavy, so consider that.
Respond here, PM, or email me.
Thread
Thread Starter
Forum
Replies
Last Post