[Sold] Holley Stealth Ram W/ Extras (NON-Vortec)
#1
Senior Member
Thread Starter
iTrader: (8)
Join Date: Jun 2009
Location: Peoria, AZ
Posts: 768
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Z28, 2000 T/A
Engine: SBC 355, LS1
Transmission: T56, T56
Axle/Gears: 10bolt 3.73, 3.42
Holley Stealth Ram W/ Extras (NON-Vortec)
Hey All, Relisting this setup, the previous deal has fallen through.
I have a Holley Stealth Ram that I picked up off here a few months back.
Here is what the lot includes
- Stealth Ram upper and lower for standard SBC heads. it's a later casting with the inner bolt holes are drilled for 45* and 72* bolt holes.
- Holley Fuel Rails w/ crossover tube
- Kirban adjustable fuel pressure regulator
- Steel braided fuel lines with hose ends.
- 2/16" Autometer carbon fiber face fuel pressure gauge 0-100 psi
- All the -6 fitting necessary to connect the fuel pressure gauge and fuel lines from the rails.
- Thermostat housing
- Throttle cable bracket
- Factory 89-92 style TB modified to clear fuel rails, with trimmed IAC housing (coolant tubes removed)
- Multiple barbed fitting to connect vacuum accessories, there is a T fitting under the center of the manifold that isn't pictured.
- Heater hose fitting, distributor hold down, CTS, IAT, TPS and IAC sensors included. I cannot guarantee the condition of the sensors. It is my understanding they are in good working order.
***the fittings in the plastic bags on the floor next to the manifold are NOT included***
I am not really wanting to separate anything out, but I will if the price is right. This is complete and ready to bolt on, the only thing needed are the fittings to adapt the stock lines to -6 put injectors in it and go. My rough guesstimate is around $1000 to put everything here together new, not including shipping.
$525 Plus Shipping FIRM. Thanks for looking!
I am not in a rush/need to sell this, so don't bother offering anything less.
HSR Weiand Wieand Holly
I have a Holley Stealth Ram that I picked up off here a few months back.
Here is what the lot includes
- Stealth Ram upper and lower for standard SBC heads. it's a later casting with the inner bolt holes are drilled for 45* and 72* bolt holes.
- Holley Fuel Rails w/ crossover tube
- Kirban adjustable fuel pressure regulator
- Steel braided fuel lines with hose ends.
- 2/16" Autometer carbon fiber face fuel pressure gauge 0-100 psi
- All the -6 fitting necessary to connect the fuel pressure gauge and fuel lines from the rails.
- Thermostat housing
- Throttle cable bracket
- Factory 89-92 style TB modified to clear fuel rails, with trimmed IAC housing (coolant tubes removed)
- Multiple barbed fitting to connect vacuum accessories, there is a T fitting under the center of the manifold that isn't pictured.
- Heater hose fitting, distributor hold down, CTS, IAT, TPS and IAC sensors included. I cannot guarantee the condition of the sensors. It is my understanding they are in good working order.
***the fittings in the plastic bags on the floor next to the manifold are NOT included***
I am not really wanting to separate anything out, but I will if the price is right. This is complete and ready to bolt on, the only thing needed are the fittings to adapt the stock lines to -6 put injectors in it and go. My rough guesstimate is around $1000 to put everything here together new, not including shipping.
$525 Plus Shipping FIRM. Thanks for looking!
I am not in a rush/need to sell this, so don't bother offering anything less.
HSR Weiand Wieand Holly
Last edited by 3rd gen Will; 04-13-2013 at 09:49 PM.
Trending Topics
#12
Member
iTrader: (6)
Join Date: Apr 2006
Location: Rochester, WA
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Car: '84 Z28
Engine: '02 LS1
Transmission: '02 T56
Axle/Gears: LS1 10-bolt 3.73 w/Auburn Pro
Re: Holley Stealth Ram W/ Extras (NON-Vortec)
Just to let anyone know who is interested, this is my old setup. The IAC, IAT and TPS were brand new a couple years back and should only have about 10,000 miles on them. Same with the Kirban AFPR. They were all in perfect working condition when I sold this setup to Will.
Will, sorry your plans didn't work out.
Will, sorry your plans didn't work out.
#13
Senior Member
Thread Starter
iTrader: (8)
Join Date: Jun 2009
Location: Peoria, AZ
Posts: 768
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Z28, 2000 T/A
Engine: SBC 355, LS1
Transmission: T56, T56
Axle/Gears: 10bolt 3.73, 3.42
Re: Holley Stealth Ram W/ Extras (NON-Vortec)
Just to let anyone know who is interested, this is my old setup. The IAC, IAT and TPS were brand new a couple years back and should only have about 10,000 miles on them. Same with the Kirban AFPR. They were all in perfect working condition when I sold this setup to Will.
Will, sorry your plans didn't work out.
Will, sorry your plans didn't work out.
I put a volt meter on the TPS and CTS and the resistances are correct, so I am 99% they are good to go.
#16
Senior Member
Thread Starter
iTrader: (8)
Join Date: Jun 2009
Location: Peoria, AZ
Posts: 768
Likes: 0
Received 2 Likes
on
2 Posts
Car: 91 Z28, 2000 T/A
Engine: SBC 355, LS1
Transmission: T56, T56
Axle/Gears: 10bolt 3.73, 3.42
Re: Holley Stealth Ram W/ Extras (NON-Vortec)
$400 + shipping.
I have someone interested in the whole setup and I'd rather sell it as a whole, I am just waiting for them to get back to me.
I have someone interested in the whole setup and I'd rather sell it as a whole, I am just waiting for them to get back to me.
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM
ctshsrthirdgen, distributor, fittings, generation, heater, holley, hose, install, plugs, ram, sensor, stealth, vortec