3rd gen goodies- alu DS, ceramic headers, TPI air box to carb setup
#1
3rd gen goodies- alu DS, ceramic headers, TPI air box to carb setup
All stuff is located near Kalamazoo MI, did a LS1 swap and selling this stuff I no longer can use. Prefer pickup but will ship on buyers dime.
Aluminum driveshaft from a 88 350TPI GTA. Has newer factory spicer U-joints that are greaseable on both ends, no dents or damage, does have light rub marks from E-brake cables. $100
Set of ceramic coated hedmen elite shorty headers with new Percy's dead soft header gaskets, and complete exhaust system with 3 inch pipe and custom 2.5 into 3 Y-pipe. 68478 is the Hedman part number for the headers. 1-5/8 primary with 3 inch ball flanged collectors. 200 for everything, not looking to separate just yet.
I have a 90-92 speed density TPI air box with a polished 3.5 inch intake tube into a carb hat, has new blue silicone couplers and band clamps. I was running this on my carbed car to get cooler air from infront of the radiator, I would assume this will work on any carbed smallblock configuration, maybe otherss, and probably TBI as well. $65
Aluminum driveshaft from a 88 350TPI GTA. Has newer factory spicer U-joints that are greaseable on both ends, no dents or damage, does have light rub marks from E-brake cables. $100
Set of ceramic coated hedmen elite shorty headers with new Percy's dead soft header gaskets, and complete exhaust system with 3 inch pipe and custom 2.5 into 3 Y-pipe. 68478 is the Hedman part number for the headers. 1-5/8 primary with 3 inch ball flanged collectors. 200 for everything, not looking to separate just yet.
I have a 90-92 speed density TPI air box with a polished 3.5 inch intake tube into a carb hat, has new blue silicone couplers and band clamps. I was running this on my carbed car to get cooler air from infront of the radiator, I would assume this will work on any carbed smallblock configuration, maybe otherss, and probably TBI as well. $65
#5
Junior Member
iTrader: (3)
Join Date: Jun 2011
Location: East Peoria, Illinois
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 RS Convertible
Engine: 377 w/Holley Commander 950 EFI
Transmission: T-56
Axle/Gears: 2.73:1 with Auburn Posi
Re: 3rd gen goodies- alu DS, ceramic headers, TPI air box to carb setup
I would possibly be interested in all of it. Would you be willing to ship? My zip is 61611
#7
Member
Join Date: Jan 2012
Location: Milwaukee
Posts: 294
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Z28
Engine: Vortec 350, hotcam
Transmission: T56
Axle/Gears: 3.73
Re: 3rd gen goodies- alu DS, ceramic headers, TPI air box to carb setup
Do you have any more pictures of the y pipe?
Trending Topics
#12
Member
Join Date: Jun 2011
Posts: 198
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Trans Am GTA
Engine: 350 carbed
Transmission: T5
Axle/Gears: 7.5 10 bolt 4.10
Re: 3rd gen goodies- alu DS, ceramic headers, TPI air box to carb setup
All stuff is located near Kalamazoo MI, did a LS1 swap and selling this stuff I no longer can use. Prefer pickup but will ship on buyers dime.
Aluminum driveshaft from a 88 350TPI GTA. Has newer factory spicer U-joints that are greaseable on both ends, no dents or damage, does have light rub marks from E-brake cables. $100
Set of ceramic coated hedmen elite shorty headers with new Percy's dead soft header gaskets, and complete exhaust system with 3 inch pipe and custom 2.5 into 3 Y-pipe. 68478 is the Hedman part number for the headers. 1-5/8 primary with 3 inch ball flanged collectors. 200 for everything, not looking to separate just yet.
I have a 90-92 speed density TPI air box with a polished 3.5 inch intake tube into a carb hat, has new blue silicone couplers and band clamps. I was running this on my carbed car to get cooler air from infront of the radiator, I would assume this will work on any carbed smallblock configuration, maybe otherss, and probably TBI as well. $65
Aluminum driveshaft from a 88 350TPI GTA. Has newer factory spicer U-joints that are greaseable on both ends, no dents or damage, does have light rub marks from E-brake cables. $100
Set of ceramic coated hedmen elite shorty headers with new Percy's dead soft header gaskets, and complete exhaust system with 3 inch pipe and custom 2.5 into 3 Y-pipe. 68478 is the Hedman part number for the headers. 1-5/8 primary with 3 inch ball flanged collectors. 200 for everything, not looking to separate just yet.
I have a 90-92 speed density TPI air box with a polished 3.5 inch intake tube into a carb hat, has new blue silicone couplers and band clamps. I was running this on my carbed car to get cooler air from infront of the radiator, I would assume this will work on any carbed smallblock configuration, maybe otherss, and probably TBI as well. $65
#15
Re: 3rd gen goodies- alu DS, ceramic headers, TPI air box to carb setup
All but exhaust cat-back is sold. Headers, ypipe, driveshaft, and airbox are sold.
If able to pick up in Kalamazoo MI, OR Chicago areas, feel free to make offer on catback. This ended up not being a item worth shipping costs and hassle.
If able to pick up in Kalamazoo MI, OR Chicago areas, feel free to make offer on catback. This ended up not being a item worth shipping costs and hassle.
#16
Member
iTrader: (22)
Join Date: Feb 2003
Location: Claremont, North Carolina
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1990 Formula Firebird
Engine: 305TBI w/ Functional Sport Hood CAI
Transmission: 700R4
Axle/Gears: SLP Posi and 3.23 Gears
Re: 3rd gen goodies- alu DS, ceramic headers, TPI air box to carb setup
Damn I wish you were closer to NC for that exhaust!
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM
1992rs/ss
NW Indiana and South Chicago Suburb
12
05-19-2020 07:02 PM
1992rs/ss
Engine/Drivetrain/Suspension Parts for Sale
16
01-28-2016 09:58 PM