[FL] Complete TPI system with airfoil & throttle spacer. 200 + shipping !!"SOLD"!!
01-27-2011, 11:09 PM
#1
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Location: Sunrise, Florida
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z28
Engine: 5.0 LB9 TPI
Transmission: 700r4
Axle/Gears: 2.73 posi drum
Complete TPI system with airfoil & throttle spacer. 200 + shipping !!"SOLD"!!
I have a TPI setup from a 91 camaro 305. This comes with the ECM, wire harness, and the complete tpi system with a hypertech airfoil and a helix throttle spacer. I did feel the little power those parts gave. It has a brand new map sensor and egr valve, not to mention this is a speed density system. The injectors are bad and that is the reason why i pulled the system off the engine. They sell the bosch 3 injectors at southbayfuelinjectors.com for i think 125. 200 + shipping for the complete system and i will even include the distributor and cap that was replaced not to long ago. Only other thing that you will need is a water neck gasket since i cleaned the base and removed it.
Last edited by camaro1122; 04-20-2011 at 10:27 PM.
03-03-2011, 12:16 AM
#3
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Location: Sunrise, Florida
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z28
Engine: 5.0 LB9 TPI
Transmission: 700r4
Axle/Gears: 2.73 posi drum
Re: Air Foil & Throttle Body Spacer
Heres some more pics.......Look at the last few posts, i cleaned the system!
Last edited by camaro1122; 04-10-2011 at 07:59 PM.
03-21-2011, 02:37 PM
#4
Junior Member
iTrader: (1)
Join Date: Apr 2009
Location: iowa
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 camaro 92 s10 99 caddy 91 4x4
Engine: 305 tbi for now
Transmission: 700 r4
Axle/Gears: 3.73 limited slip
Re: Complete TPI setup with air foil and throttle spacer!
How much just for the harness? If you were to part it from the system.
03-21-2011, 02:48 PM
#5
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Location: Sunrise, Florida
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z28
Engine: 5.0 LB9 TPI
Transmission: 700r4
Axle/Gears: 2.73 posi drum
Re: Complete TPI setup with air foil and throttle spacer!
Id sell it for 125 plus shipping
03-22-2011, 08:04 PM
#7
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Location: Sunrise, Florida
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z28
Engine: 5.0 LB9 TPI
Transmission: 700r4
Axle/Gears: 2.73 posi drum
Re: Complete TPI setup with air foil and throttle spacer!
200 OBO
Trending Topics
03-22-2011, 08:23 PM
#8
Junior Member
iTrader: (1)
Join Date: Apr 2009
Location: iowa
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 camaro 92 s10 99 caddy 91 4x4
Engine: 305 tbi for now
Transmission: 700 r4
Axle/Gears: 3.73 limited slip
Re: Complete TPI setup with air foil and throttle spacer!
Would I be able to use your ecm, or did you have vats removed from it or would I need your key.
03-22-2011, 08:39 PM
#9
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Location: Sunrise, Florida
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z28
Engine: 5.0 LB9 TPI
Transmission: 700r4
Axle/Gears: 2.73 posi drum
Re: Complete TPI setup with air foil and throttle spacer!
I did have vats removed but i will provide a key. I wont part the ecm from the wire harness though, i want to keep it all together
03-23-2011, 07:10 PM
#10
Junior Member
iTrader: (1)
Join Date: Apr 2009
Location: iowa
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 camaro 92 s10 99 caddy 91 4x4
Engine: 305 tbi for now
Transmission: 700 r4
Axle/Gears: 3.73 limited slip
Re: Complete TPI setup with air foil and throttle spacer!
How much for the harness and ecm together? and what would be shipping to Iowa you think.
03-23-2011, 08:16 PM
#11
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Location: Sunrise, Florida
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z28
Engine: 5.0 LB9 TPI
Transmission: 700r4
Axle/Gears: 2.73 posi drum
Re: Complete TPI setup with air foil and throttle spacer!
The harness + Ecm and key i will sell for 125 and add 20 for shipping. I want to be on the safe side with the shipping since i never have shipped something that heavy before. If it totals out to more than 20 ill pay out of my pocket for the rest.
03-23-2011, 08:43 PM
#12
Junior Member
iTrader: (1)
Join Date: Apr 2009
Location: iowa
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 camaro 92 s10 99 caddy 91 4x4
Engine: 305 tbi for now
Transmission: 700 r4
Axle/Gears: 3.73 limited slip
Re: Complete TPI setup with air foil and throttle spacer!
I will be getting a hold of you soon!
03-23-2011, 08:53 PM
#13
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Location: Sunrise, Florida
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z28
Engine: 5.0 LB9 TPI
Transmission: 700r4
Axle/Gears: 2.73 posi drum
Re: Complete TPI setup with air foil and throttle spacer!
Sounds good just PM me for my info
03-23-2011, 09:42 PM
#14
Junior Member
Join Date: Dec 2010
Location: Colorado Springs
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Car: 85' Jeep CJ7
Engine: 407 w/Accel Super Ram
Transmission: Bullet Proofed DANA 300
Axle/Gears: Dana 44's w/4:56 & ARB's
Re: Complete TPI setup with air foil and throttle spacer!
I am toying with the idea of building a 350 4-bolt for my wifes Jeep. I have the motor and 2 new thruster ecu's to use but I have a couple of quick questions before we strike a done deal though. The price isn't an issue if all of the sensors are included. I have a full set of newly rebuilt 30lb Bosch III injectors so that should solve that issue. What shape is the harness in and is it a Gen6 or 7? What kind of distributor does this come with... a dual sync? Is there an O2 and/or knock sensor with this?? Is the system complete minus the thermostat housing? If you can please drop me line or txt to discuss. I have sent my contact info to you via PM. Thanks
03-30-2011, 10:32 PM
#15
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Location: Sunrise, Florida
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z28
Engine: 5.0 LB9 TPI
Transmission: 700r4
Axle/Gears: 2.73 posi drum
Re: Complete TPI setup with air foil and throttle spacer!
Bump...make offers, will sell the air foil or spacer seperate.
03-31-2011, 10:20 PM
#16
Junior Member
Join Date: Jul 2009
Location: Point Pleasant, NJ
Posts: 31
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 Trans Am
Engine: 350 TPI
Transmission: 700r4
Axle/Gears: 3.23
Re: Complete TPI setup with air foil and throttle spacer!
How much for the air foil and how much for the spacer? Or both.
03-31-2011, 11:10 PM
#17
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Location: Sunrise, Florida
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z28
Engine: 5.0 LB9 TPI
Transmission: 700r4
Axle/Gears: 2.73 posi drum
Re: Complete TPI setup with air foil and throttle spacer!
Make an offer
04-03-2011, 10:48 PM
#18
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Location: Sunrise, Florida
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z28
Engine: 5.0 LB9 TPI
Transmission: 700r4
Axle/Gears: 2.73 posi drum
Re: Complete TPI setup with air foil and throttle spacer!
Heres some more pics, except i spent all day cleaning it. Im still not finished cleaning
Last edited by camaro1122; 04-03-2011 at 11:00 PM.
04-03-2011, 11:08 PM
#20
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Location: Sunrise, Florida
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z28
Engine: 5.0 LB9 TPI
Transmission: 700r4
Axle/Gears: 2.73 posi drum
Re: Complete TPI setup with air foil and throttle spacer!
Honestly if someone is interested in this unit i will sell the complete system for 250 + shipping.
Last edited by camaro1122; 04-10-2011 at 07:55 PM.
04-10-2011, 07:55 PM
#21
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Location: Sunrise, Florida
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z28
Engine: 5.0 LB9 TPI
Transmission: 700r4
Axle/Gears: 2.73 posi drum
Re: Complete TPI setup with air foil and throttle spacer!
Im to the point where i just need this gone. Im selling everything listed for 200 + the shipping cost. Thats probably the cheapest system you will find, all that it needs are new injectors and the thermostat with gasket.
04-12-2011, 10:40 AM
#22
Senior Member
iTrader: (5)
Join Date: Aug 2010
Location: Wichita Falls, TX
Posts: 916
Likes: 0
Received 8 Likes
on
8 Posts
Car: 91 Firebird,00 c2500,75 Vette
Engine: 3.1 but 350 soon, 350, 350
Transmission: T56 soon
Axle/Gears: stock 3.42 Posi to come
Re: Complete TPI setup with air foil and throttle spacer!
How much would shipping be to 76301. Did I read right that this is vats delete and otherwise complete ready to bolt on w/ new gaskets and injectors?
Last edited by 91phoenix; 04-12-2011 at 10:44 AM.
04-12-2011, 12:28 PM
#23
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Location: Sunrise, Florida
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z28
Engine: 5.0 LB9 TPI
Transmission: 700r4
Axle/Gears: 2.73 posi drum
Re: Complete TPI setup with air foil and throttle spacer!
The total comes to 44.79 https://www.fedex.com/ratefinder/sta...=getQuickQuote . Yes it had a vats delete, it has all the gaskets but the water neck gasket and you need a new thermostat and injectors. That was my stalling problem from those bad injectors.
04-12-2011, 12:54 PM
#24
Senior Member
iTrader: (5)
Join Date: Aug 2010
Location: Wichita Falls, TX
Posts: 916
Likes: 0
Received 8 Likes
on
8 Posts
Car: 91 Firebird,00 c2500,75 Vette
Engine: 3.1 but 350 soon, 350, 350
Transmission: T56 soon
Axle/Gears: stock 3.42 Posi to come
Re: Complete TPI setup with air foil and throttle spacer!
Thanks for the quick replies and with the last info I requested I will buy this.
04-12-2011, 12:58 PM
#25
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Location: Sunrise, Florida
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z28
Engine: 5.0 LB9 TPI
Transmission: 700r4
Axle/Gears: 2.73 posi drum
Re: Complete TPI setup with air foil and throttle spacer!
Sounds good, just PM the info. Thanks
04-13-2011, 10:12 PM
#26
Member
Join Date: Jan 2007
Location: 'Bama
Posts: 113
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 IROC-Z
Engine: StealthRam 355
Transmission: 6-speed
Axle/Gears: 3.70 9-bolt
Re: Complete TPI system with airfoil & throttle spacer. 200 + shipping
Sold? Or still available?
If available I'll take it. Just lemme know.
If available I'll take it. Just lemme know.
04-14-2011, 05:31 AM
#27
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Location: Sunrise, Florida
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z28
Engine: 5.0 LB9 TPI
Transmission: 700r4
Axle/Gears: 2.73 posi drum
Re: Complete TPI system with airfoil & throttle spacer. 200 + shipping
Sale is pending
04-16-2011, 11:49 PM
#28
Want a title? Post!
Join Date: Sep 2010
Location: Brisbane Australia Downunder
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Corvette
Engine: 350
Transmission: 700 auto
Axle/Gears: 3.08
Re: Complete TPI system with airfoil & throttle spacer. 200 + shipping
If available i will purchase now please advise thanks.
04-20-2011, 10:26 PM
#29
Member
Thread Starter
iTrader: (1)
Join Date: Mar 2010
Location: Sunrise, Florida
Posts: 482
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro Z28
Engine: 5.0 LB9 TPI
Transmission: 700r4
Axle/Gears: 2.73 posi drum
Re: Complete TPI system with airfoil & throttle spacer. 200 + shipping
Sold
04-27-2011, 10:09 PM
#30
Senior Member
iTrader: (5)
Join Date: Aug 2010
Location: Wichita Falls, TX
Posts: 916
Likes: 0
Received 8 Likes
on
8 Posts
Car: 91 Firebird,00 c2500,75 Vette
Engine: 3.1 but 350 soon, 350, 350
Transmission: T56 soon
Axle/Gears: stock 3.42 Posi to come
Re: Complete TPI system with airfoil & throttle spacer. 200 + shipping
This TPI system just arrived today well packaged and just as described. I am very satisified.
Thread
Thread Starter
Forum
Replies
Last Post
Terrell351
Engine/Drivetrain/Suspension Parts for Sale
5
06-13-2021 01:13 PM
beachrodder
Tech / General Engine
7
08-25-2015 08:05 AM
86IROC112
Engine/Drivetrain/Suspension Parts for Sale
4
08-17-2015 02:00 PM
