DeltaElite121

Alright, long story short - I've got other bills I need to pay like everyone else. I haven't used these at all since I unboxed them and what you see is what you're getting fresh from machining and port work. The only things these heads do NOT have are the studs and guide plates. I figured I'd try letting them go to a fellow third genner before Ebaying them.

Dart Iron Eagle 200CC heads specs:

Port matched to Felpro 1205 gaskets
Intake bowls mild porting with short side rolled
Exhaut mild porting with short side rolled
2.02 stainless undercut stem with 30 degree backcut
1.600 stainless undercut stem with 30 degree backcut
Serdi 3-angle valve job
Teflon positive valve seals
1.437 O.D. .600 lift springs
Spring cups
66cc chambers
Deck surface machined
Machined 7 degree locks
Chromemoly black oxide retainers

My asking price is $675 + shipping. Throw in another $100 and I'll include a set of used Harland Sharp 1.6 7/16 rockers.


As for pictures (I'll take new better ones tomorrow if I've got time) -










$350 + shipping for the wheels. They're in 95% condition with only a slight brazing on one of the wheels, hardly anywhere close to curb rash and is easily fixable by all means with two minutes of sanding. Was going to blast them and repaint them, but I doubt I'll have the time with what I have going on now. Center caps are also in great shape and I've got all four of them.

I strongly prefer USPS money orders because of prior ill circumstances with Paypal, but I am verified and use it regularly on Ebay still so I'll consider it. I understand I don't have any feedback and that can be nerve wracking so I'll do what I can to make an honest deal for both me and the buyer.

If you have any questions feel free to ask here or PM me.

DeltaElite121

bump. I've still got them.

DeltaElite121

bump.

racing geek

iTrader: (5)

pm sent

DeltaElite121

Replied.

MikeSammy

Have the heads been sold?

Bullydawg

iTrader: (7)

Take $375 shipped to 95973 for the wheels?

DeltaElite121

Not yet Mike, but I've got a few people checking their finances and such. Still open, though.

Bully - I'll get back to you. I suspect shipping will probably be around $20 a wheel or so realistically based on the size and weight so I may have to think about that one.

DeltaElite121

Still have the heads.

DeltaElite121

Bump. Decided to rework the SS wheels. Just spent a massive chunk on paint/clear/everything else for them, and they're a custom light flake "ghost" black according to Dupont. First wheel is coming out real well. I will post pics when they're done. Not a rattle can job, and definitely not cheap either (and price will reflect this also once I figure it out).

ian1320

Are the heads drilled for multiple intake styles? I already have a vortec style intake and if it will fit these heads im very interested.

DeltaElite121

No, these are standard SBC heads, non-vortec (and not modified for them). If you've already got vortec heads you may be better off spending your money on your heads with someone who does good port work instead of buying aftermarket heads unless you want to swap intakes.

DeltaElite121

Bump for the heads (again). Check out my other thread for the redone SS wheels below.

https://www.thirdgen.org/forums/exte...ss-wheels.html

DeltaElite121

Back to the top again. You guys saving your pennies for Christmas presents out there or something? Come on.

DeltaElite121

Gotten quite a few hits, but I see no green so the heads are still for sale.

DeltaElite121

Bump again.

DeltaElite121

Gotten quite a few more offers, but still no green. I am willing to entertain offers, but I've already got the heads reasonably priced for the condition and the work put into them so please don't try to get a few hundred knocked off because it's not happening. Be reasonable.

SoCo80p

iTrader: (5)

Try craigslist, just unloaded my heads there

DeltaElite121

I actually had them up on CL awhile ago. Relisted them. We'll see.