Many NEW LT1 Parts and other stuff
#1
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Long Island, NY
Posts: 599
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Many NEW LT1 Parts and other stuff
I have the following for sale:
New Speed Pro Forged & Skirted Pistons (11:1 compression) $300
New Speed Pro 1/16 Moly Rings - Hand Fit To Cylinders $80
New Eagle Cast Steel Crank 3.75 Stroke $170
New Eagle 5.7 Rods W/Floating Pins $300
New Comp-Cams LT1 Cam (.576/.571 lift @ .050, 230/236 duration) 113 LSA $200 Comp cams recommends bee hive springs P/N 26918
New Steel L98/LT1 Flywheel $350
All prices do not include shipping. I will ONLY take Paypal or cash upon pick up. i am on Long Island.
Photos attached
New Speed Pro Forged & Skirted Pistons (11:1 compression) $300
New Speed Pro 1/16 Moly Rings - Hand Fit To Cylinders $80
New Eagle Cast Steel Crank 3.75 Stroke $170
New Eagle 5.7 Rods W/Floating Pins $300
New Comp-Cams LT1 Cam (.576/.571 lift @ .050, 230/236 duration) 113 LSA $200 Comp cams recommends bee hive springs P/N 26918
New Steel L98/LT1 Flywheel $350
All prices do not include shipping. I will ONLY take Paypal or cash upon pick up. i am on Long Island.
Photos attached
Last edited by SomeGuy25thZ; 02-16-2011 at 06:55 AM.
#5
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Long Island, NY
Posts: 599
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: Many NEW LT1 Parts and other stuff
TTT
This is perfect for anyone wanting a nice ~450 hp 383 LT1. Please make offers as well.
This is perfect for anyone wanting a nice ~450 hp 383 LT1. Please make offers as well.
#6
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Long Island, NY
Posts: 599
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: Many NEW LT1 Parts and other stuff
TTT. Please make offers (reasonable), everything must sell
#7
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Long Island, NY
Posts: 599
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: Many NEW LT1 Parts and other stuff
$1700 Shipped in US or $1400 picked up. Paypal or cash only. Everything is NEW - this is the fastest and cheapest 383 LT1 build anyone will make here.
Please make offers for anything listed. I can provide more pics if requested. Everything is pretty much boxed and ready to go.
Please make offers for anything listed. I can provide more pics if requested. Everything is pretty much boxed and ready to go.
Trending Topics
#9
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Long Island, NY
Posts: 599
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: Many NEW LT1 Parts and other stuff
Holiday sale:
Entire 383 Rotating assembly for LT1 - $1200 picked up or $1400 shipped in US.
I will take REASONABLE offers on all parts.
Entire 383 Rotating assembly for LT1 - $1200 picked up or $1400 shipped in US.
I will take REASONABLE offers on all parts.
#12
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Long Island, NY
Posts: 599
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: Many NEW LT1 Parts and other stuff
Yes, I am almost certain they fit under the stock valve covers. worst thing is you may have to trim a little bit of the web inside the valve cover but I was going to run it with stock valve covers too. They are for 3/8" studs. I will sell you the rocker arms and studs together for the price listed above ($170) plus shipping.
#17
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Long Island, NY
Posts: 599
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: Many NEW LT1 Parts and other stuff
TTT - everything is still up for sale. nothing sold so far
#18
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Long Island, NY
Posts: 599
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: Many NEW LT1 Parts and other stuff
TTT
Clutch Kit and LT1 harness sold. All else is still up for grabs
Clutch Kit and LT1 harness sold. All else is still up for grabs
#19
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Long Island, NY
Posts: 599
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: Many NEW LT1 Parts and other stuff
Roller Rockers and Rocker Studs SOLD
Everything else is still for sale!!
Everything else is still for sale!!
#20
Supreme Member
iTrader: (34)
Join Date: Jul 2002
Location: Stamford, New York
Posts: 1,983
Likes: 0
Received 6 Likes
on
3 Posts
Car: 80 SE/TTA;88 T/A GTA;86 T/A
Engine: 4.9L Turbo; LT1; empty
Transmission: TH350; T56; empty
Axle/Gears: 3:23 disk; 4:10 disk ; 3.42 disk
Re: Many NEW LT1 Parts and other stuff
What is the accesory brackets from/for? Fbody or Ybody LT1?
#21
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Long Island, NY
Posts: 599
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: Many NEW LT1 Parts and other stuff
Accessory brackets are for F-body LT1
#23
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Long Island, NY
Posts: 599
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: Many NEW LT1 Parts and other stuff
Not a dumb question because i am not sure
What is standard bore? The size of the factory LT1 cylinder? I dont think the bore needs to be increased for the 383 build it was in but I might be talking out my ***... can someone chime in or post this on the engine tech board and let me know too lol
What is standard bore? The size of the factory LT1 cylinder? I dont think the bore needs to be increased for the 383 build it was in but I might be talking out my ***... can someone chime in or post this on the engine tech board and let me know too lol
#25
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Long Island, NY
Posts: 599
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: Many NEW LT1 Parts and other stuff
I just checked them. They are
FERREA F801500 OEM Style 1.500" Exhaust Valves
FERREA F801940 OEM Style 1.940" Intake Valves
These are selling online for $63 ea. set new - total of $123. My fault for not checking this before but since I listed $90 I will keep it at $90 plus shipping and NO less as you can see the huge price difference. Again these are brand new and never ran.
FERREA F801500 OEM Style 1.500" Exhaust Valves
FERREA F801940 OEM Style 1.940" Intake Valves
These are selling online for $63 ea. set new - total of $123. My fault for not checking this before but since I listed $90 I will keep it at $90 plus shipping and NO less as you can see the huge price difference. Again these are brand new and never ran.
#26
Senior Member
iTrader: (5)
Join Date: May 2005
Location: Midwest IL
Posts: 831
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Z28
Engine: Alky 360
Transmission: TH400, Freakshow 9.5"
Axle/Gears: 9" 4.71
Re: Many NEW LT1 Parts and other stuff
If it was to be a correct 383 build then the pistons would be .030" over. Standard bore is 4.00 these pistons should be 4.030. The only concern would be the hand fitted rings????
#27
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Long Island, NY
Posts: 599
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: Many NEW LT1 Parts and other stuff
The hand fit deal - When i bought this setup this is how all the parts were listed so I just copied and pasted the posting word for word to put up for sale again here.
Everything shown is still for sale!!!!
#28
Junior Member
Join Date: Oct 2009
Location: Bloomington
Posts: 23
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Formula
Engine: 305 TBI....:/
Transmission: 700R4
Re: Many NEW LT1 Parts and other stuff
Not a dumb question because i am not sure
What is standard bore? The size of the factory LT1 cylinder? I dont think the bore needs to be increased for the 383 build it was in but I might be talking out my ***... can someone chime in or post this on the engine tech board and let me know too lol
What is standard bore? The size of the factory LT1 cylinder? I dont think the bore needs to be increased for the 383 build it was in but I might be talking out my ***... can someone chime in or post this on the engine tech board and let me know too lol
#29
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Long Island, NY
Posts: 599
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: Many NEW LT1 Parts and other stuff
You can buy the pistons and use whichever rings you want. I'll even make you a better deal on it - buy the pistons and I'll give you the rings for $15 ($80 listed) since it is becoming a big concern.
Is there something I can do to make it less of a concern? The rings are on the pistons now but I have no block to install them in. I do have pics from the original install but not sure what that will show other than the pistons in the cylinders with the rings fit like they should.
#30
Junior Member
iTrader: (1)
Join Date: Jul 2009
Location: Melbourne Fl
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 z
Engine: 96 350 HSR vortec
Transmission: 700R4 24-2800 BDR stall
Axle/Gears: 9 bolt disc posi w/3.45
Re: Many NEW LT1 Parts and other stuff
Those pistons will be for a 383 which is a diff stroke crank so they will not work with a 350 crank.383 crank has about a 1/4" more stroke so the wrist pins are moved up higher on the piston.Just chiming in.Kinda intrested in that crank, what can you do for price?
#35
Junior Member
Join Date: Jul 2006
Location: Mansfield, OH
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Camaro RS
Engine: LT1 Swap in process
Transmission: 700R4, 3000 Stall
Axle/Gears: Posi disc brake 3.42
Re: Many NEW LT1 Parts and other stuff
Still have the accessory brackets?
#38
Senior Member
iTrader: (5)
Join Date: Feb 2008
Location: oklahoma
Posts: 932
Likes: 0
Received 0 Likes
on
0 Posts
Car: 02wrx/88 rs
Engine: 2.0L turbo/nothing yet!
Transmission: 4eat/waiting on a t56
Axle/Gears: 3.73
Re: Many NEW LT1 Parts and other stuff
do you have a water pump? what about the drivers side accessory bracket?
#40
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Long Island, NY
Posts: 599
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: Many NEW LT1 Parts and other stuff
All items not listed as sold as still for sale!
I know several people are looking into LT1 builds. Here is your opportunity to do it cheap. My new build is just about done so all this stuff is just taking up space.
I know several people are looking into LT1 builds. Here is your opportunity to do it cheap. My new build is just about done so all this stuff is just taking up space.
#41
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Long Island, NY
Posts: 599
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: Many NEW LT1 Parts and other stuff
Parts are still for sale. I dont think these prices are too much
Let me know if pics or more information is needed.
Let me know if pics or more information is needed.
#43
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Long Island, NY
Posts: 599
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: Many NEW LT1 Parts and other stuff
Info directly off the cam card:
Serial# UQ4635-06
Part# 07-467-8
Grind# LT1 280XFI HR-13
let me know if you need any other info
Serial# UQ4635-06
Part# 07-467-8
Grind# LT1 280XFI HR-13
let me know if you need any other info
#48
Junior Member
Join Date: Nov 2005
Location: South Bend, IN
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 K1500 Sport
Engine: LT1
Transmission: 700R4
Axle/Gears: 9.5" 14 bolt, 3.42s, open :(
Re: Many NEW LT1 Parts and other stuff
Still have the acc. brackets? I need the alt. bracket and a/c delete.
#49
Senior Member
Thread Starter
Join Date: Sep 2007
Location: Long Island, NY
Posts: 599
Likes: 0
Received 1 Like
on
1 Post
Car: 1992 z28
Engine: 383 LT1 in the works
Transmission: T-56 in the works
Axle/Gears: 3.73 in the works
Re: Many NEW LT1 Parts and other stuff
I am 99% sure i do. everything is in my attic space above my garage so i'll run up tonight and pull it out. Let me know if seriously interested. I'll take $150 shipped for both. I dont have the mounting bolts though.
#50
Junior Member
Join Date: Nov 2005
Location: South Bend, IN
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 K1500 Sport
Engine: LT1
Transmission: 700R4
Axle/Gears: 9.5" 14 bolt, 3.42s, open :(
Re: Many NEW LT1 Parts and other stuff
Yes, I am interested and can send you the money asap. Let me know if you find them tonight. Thanks.