[Sold] AFR 195's Eliminator Heads 75cc-#1038-NEW
09-29-2009, 01:41 PM
#1
Junior Member
Thread Starter
iTrader: (4)
Join Date: Apr 2004
Location: Sudbury,Ontario
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am GTA
Engine: 350 TPI
Transmission: 700r4 rebuild, heavy duty clutch pa
AFR 195's Eliminator Heads 75cc-#1038-NEW
Cleaning out the garage, these heads are new. Bought them for my supercharger to lower the compression but am going a different route now. I actually just sold the supercharger so I don't need these heads. 1250 + shipping.
195 SBC ELIMINATOR STREET HEAD FLOW NUMBERS
AFR INTAKE AFR EXHAUST
.200 137 CFM 110 CFM
.300 194 CFM 158 CFM
.400 240 CFM 190 CFM
.500 270 CFM 207 CFM
.550 280 CFM 211 CFM
.600 286 CFM 215 CFM
195cc Street Heads, L98 Angle Plug w/heat riser, 75cc
The Ultimate Bolt-on Emissions Legal Street Weapon. 195cc intake port small block Chevy cylinder heads are L98 angle plug versions. These heads feature a 75cc combustion chamber with a 64cc exhaust port and a 3/4” thick head deck (ideal for nitrous or blower applications). Standard valves are 2.050 (comp package has 2.080) intake and 1.600 exhaust with AFR’s hardened ductile iron interlocking valve seats. The exceptional flow characteristics, ideal operating range of 2000 rpm to 6500 rpm, 23º valve angle, and standard valve spacing make this the perfect street head for 350 cid to 400 cid engines from 1955-86. . No special parts are required. Dual valve cover bolt pattern is standard. Exhaust port is raised .100 over GM L98 Head.
More info available here :
http://www.summitracing.com/parts/AF...n/?prefilter=0
195 SBC ELIMINATOR STREET HEAD FLOW NUMBERS
AFR INTAKE AFR EXHAUST
.200 137 CFM 110 CFM
.300 194 CFM 158 CFM
.400 240 CFM 190 CFM
.500 270 CFM 207 CFM
.550 280 CFM 211 CFM
.600 286 CFM 215 CFM
195cc Street Heads, L98 Angle Plug w/heat riser, 75cc
The Ultimate Bolt-on Emissions Legal Street Weapon. 195cc intake port small block Chevy cylinder heads are L98 angle plug versions. These heads feature a 75cc combustion chamber with a 64cc exhaust port and a 3/4” thick head deck (ideal for nitrous or blower applications). Standard valves are 2.050 (comp package has 2.080) intake and 1.600 exhaust with AFR’s hardened ductile iron interlocking valve seats. The exceptional flow characteristics, ideal operating range of 2000 rpm to 6500 rpm, 23º valve angle, and standard valve spacing make this the perfect street head for 350 cid to 400 cid engines from 1955-86. . No special parts are required. Dual valve cover bolt pattern is standard. Exhaust port is raised .100 over GM L98 Head.
More info available here :
http://www.summitracing.com/parts/AF...n/?prefilter=0
Last edited by darakus; 06-16-2010 at 09:05 PM.
10-03-2009, 07:37 AM
#3
Junior Member
Thread Starter
iTrader: (4)
Join Date: Apr 2004
Location: Sudbury,Ontario
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am GTA
Engine: 350 TPI
Transmission: 700r4 rebuild, heavy duty clutch pa
Re: AFR 195's Eliminator Heads 75cc-#1038-NEW
Heads really good for you nitrous people out there!!
Last edited by darakus; 10-03-2009 at 07:41 AM.
10-10-2009, 01:14 PM
#6
Junior Member
Thread Starter
iTrader: (4)
Join Date: Apr 2004
Location: Sudbury,Ontario
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am GTA
Engine: 350 TPI
Transmission: 700r4 rebuild, heavy duty clutch pa
Re: AFR 195's Eliminator Heads 75cc-#1038-NEW
lol.......................no
10-10-2009, 11:54 PM
#7
Member
iTrader: (4)
Join Date: Mar 2004
Location: Honea Path, SC
Posts: 216
Received 15 Likes
on
11 Posts
Car: 1985 Z28
Engine: 383
Transmission: 700R4
Axle/Gears: 10 bolt/3.73
Re: AFR 195's Eliminator Heads 75cc-#1038-NEW
Dang...wish I hadn't already bought mine already. Bump for a great deal on a great set of heads.
Trending Topics
10-31-2009, 09:37 PM
#9
Junior Member
Thread Starter
iTrader: (4)
Join Date: Apr 2004
Location: Sudbury,Ontario
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am GTA
Engine: 350 TPI
Transmission: 700r4 rebuild, heavy duty clutch pa
Re: AFR 195's Eliminator Heads 75cc-#1038-NEW
Take er to de top
11-03-2009, 09:10 AM
#10
Junior Member
iTrader: (2)
Join Date: Jun 2003
Location: Gainesville, FL
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Re: AFR 195's Eliminator Heads 75cc-#1038-NEW
Great price for a great set of heads. I have the 65cc 1040's. Plus you wont have to wait the 2 1/2 months for AFR to build them. 
Only complaint with them is the shallow center holes for the centerbolt stuff. Easily fixed though.
Only complaint with them is the shallow center holes for the centerbolt stuff. Easily fixed though.
11-16-2009, 01:10 PM
#12
Supreme Member
iTrader: (35)
Join Date: Aug 2006
Location: Mississauga,Ont,Canada
Posts: 1,470
Likes: 0
Received 1 Like
on
1 Post
Car: 89 IROC
Engine: LSX 6.0 370, TU2 Cam, Fast intake
Transmission: T56 w/ lots of goodies
Axle/Gears: 8.8, Posi, 4.10, 31 Spline
Re: AFR 195's Eliminator Heads 75cc-#1038-NEW
If I didnt buy a set of RPMS I would have been all over this. If I could find a buyer from mine id be over this for sure as well. Good luck with the sale
11-16-2009, 08:54 PM
#13
TGO Supporter/Moderator
iTrader: (12)
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,732
Likes: 0
Received 89 Likes
on
75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
Re: AFR 195's Eliminator Heads 75cc-#1038-NEW
I can get you 1040s for under $1300, with the 8017 spring package in under 14 days.
AFR heads are great. Whomever buys these will be VERY HAPPY! Like darakus said, the 75cc chambers are great for nitrous and a blower with some reverse dome pistons.
-- Joe
11-29-2009, 04:12 PM
#14
Junior Member
Thread Starter
iTrader: (4)
Join Date: Apr 2004
Location: Sudbury,Ontario
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am GTA
Engine: 350 TPI
Transmission: 700r4 rebuild, heavy duty clutch pa
Re: AFR 195's Eliminator Heads 75cc-#1038-NEW
Heads are still available, shipping negotiable ...
12-04-2009, 05:17 PM
#15
Junior Member
Thread Starter
iTrader: (4)
Join Date: Apr 2004
Location: Sudbury,Ontario
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am GTA
Engine: 350 TPI
Transmission: 700r4 rebuild, heavy duty clutch pa
Re: AFR 195's Eliminator Heads 75cc-#1038-NEW
pm sent
12-12-2009, 02:15 PM
#16
Junior Member
Thread Starter
iTrader: (4)
Join Date: Apr 2004
Location: Sudbury,Ontario
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am GTA
Engine: 350 TPI
Transmission: 700r4 rebuild, heavy duty clutch pa
Re: AFR 195's Eliminator Heads 75cc-#1038-NEW
as previously posted, shipping is negotiable
12-24-2009, 10:04 AM
#17
Junior Member
Thread Starter
iTrader: (4)
Join Date: Apr 2004
Location: Sudbury,Ontario
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am GTA
Engine: 350 TPI
Transmission: 700r4 rebuild, heavy duty clutch pa
Re: AFR 195's Eliminator Heads 75cc-#1038-NEW
Merry Xmas all!! New heads are wanting a new home(motor) to spread the joy....
12-24-2009, 12:59 PM
#18
Junior Member
Join Date: Jan 2002
Location: sumter,south carolina
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 firebird gta
Engine: sbc 355 hsr 280xfi 58mm tb
Transmission: raptor 700r-4, 2800 stall
Axle/Gears: 3.42
Re: AFR 195's Eliminator Heads 75cc-#1038-NEW
yeah i ordered a set last month but won't get them until jan 2010 !
02-01-2010, 09:15 PM
#23
Junior Member
Thread Starter
iTrader: (4)
Join Date: Apr 2004
Location: Sudbury,Ontario
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am GTA
Engine: 350 TPI
Transmission: 700r4 rebuild, heavy duty clutch pa
Re: AFR 195's Eliminator Heads 75cc-#1038-NEW
hey lakers73kb8 these would not fit on your hoe.
Upon further viewing on their website -- Available for 1987 to present engines with center bolt valve covers and 2 center intake bolts at 72° angle (AFR #1041).
sorry for the mixup!!
Upon further viewing on their website -- Available for 1987 to present engines with center bolt valve covers and 2 center intake bolts at 72° angle (AFR #1041).
sorry for the mixup!!
Last edited by darakus; 04-19-2010 at 03:44 PM.
02-03-2010, 12:49 PM
#24
Re: AFR 195's Eliminator Heads 75cc-#1038-NEW
Cleaning out the garage, these heads are new. Bought them for my supercharger to lower the compression but am going a different route now. I actually just sold the supercharger so I don't need these heads. 1250 + shipping.
195 SBC ELIMINATOR STREET HEAD FLOW NUMBERS
AFR INTAKE AFR EXHAUST
.200 137 CFM 110 CFM
.300 194 CFM 158 CFM
.400 240 CFM 190 CFM
.500 270 CFM 207 CFM
.550 280 CFM 211 CFM
.600 286 CFM 215 CFM
195cc Street Heads, L98 Angle Plug w/heat riser, 75cc
The Ultimate Bolt-on Emissions Legal Street Weapon. The AFR Emissions Legal (versions from 1969-94 with heat riser, CARB EO #D-250-2), 195cc intake port small block Chevy cylinder heads are available in your choice of straight or L98 angle plug versions. These heads feature a 75cc combustion chamber with a 64cc exhaust port and a 3/4” thick head deck (ideal for nitrous or blower applications). Standard valves are 2.050 (comp package has 2.080) intake and 1.600 exhaust with AFR’s hardened ductile iron interlocking valve seats. The exceptional flow characteristics, ideal operating range of 2000 rpm to 6500 rpm, 23º valve angle, and standard valve spacing make this the perfect street head for 350 cid to 400 cid engines from 1955-86. Available for 1987 to present engines with center bolt valve covers and 2 center intake bolts at 72º angle. No special parts are required. Dual valve cover bolt pattern is standard. Exhaust port is raised .100 over GM L98 Head.
195 SBC ELIMINATOR STREET HEAD FLOW NUMBERS
AFR INTAKE AFR EXHAUST
.200 137 CFM 110 CFM
.300 194 CFM 158 CFM
.400 240 CFM 190 CFM
.500 270 CFM 207 CFM
.550 280 CFM 211 CFM
.600 286 CFM 215 CFM
195cc Street Heads, L98 Angle Plug w/heat riser, 75cc
The Ultimate Bolt-on Emissions Legal Street Weapon. The AFR Emissions Legal (versions from 1969-94 with heat riser, CARB EO #D-250-2), 195cc intake port small block Chevy cylinder heads are available in your choice of straight or L98 angle plug versions. These heads feature a 75cc combustion chamber with a 64cc exhaust port and a 3/4” thick head deck (ideal for nitrous or blower applications). Standard valves are 2.050 (comp package has 2.080) intake and 1.600 exhaust with AFR’s hardened ductile iron interlocking valve seats. The exceptional flow characteristics, ideal operating range of 2000 rpm to 6500 rpm, 23º valve angle, and standard valve spacing make this the perfect street head for 350 cid to 400 cid engines from 1955-86. Available for 1987 to present engines with center bolt valve covers and 2 center intake bolts at 72º angle. No special parts are required. Dual valve cover bolt pattern is standard. Exhaust port is raised .100 over GM L98 Head.
Why don't you put them on kijiji, and sell them local?
04-18-2010, 11:22 PM
#25
Junior Member
Thread Starter
iTrader: (4)
Join Date: Apr 2004
Location: Sudbury,Ontario
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am GTA
Engine: 350 TPI
Transmission: 700r4 rebuild, heavy duty clutch pa
Re: AFR 195's Eliminator Heads 75cc-#1038-NEW
hey guys just got back from working, the heads are still available.
Yea I am trying to sell these local 88blackz-51,why you wanna buy them?
Yea I am trying to sell these local 88blackz-51,why you wanna buy them?
04-19-2010, 03:35 PM
#27
Junior Member
Thread Starter
iTrader: (4)
Join Date: Apr 2004
Location: Sudbury,Ontario
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am GTA
Engine: 350 TPI
Transmission: 700r4 rebuild, heavy duty clutch pa
Re: AFR 195's Eliminator Heads 75cc-#1038-NEW
yes they are - Dual valve cover bolt pattern is standard .. just to clarify they are for -- 350 cid to 400 cid engines from 1955-86.
Last edited by darakus; 04-19-2010 at 03:45 PM.
04-30-2010, 10:36 PM
#28
Junior Member
Thread Starter
iTrader: (4)
Join Date: Apr 2004
Location: Sudbury,Ontario
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am GTA
Engine: 350 TPI
Transmission: 700r4 rebuild, heavy duty clutch pa
Re: AFR 195's Eliminator Heads 75cc-#1038-NEW
springs here ........................ get these heads before summer!!
05-16-2010, 10:44 PM
#30
Member
Join Date: Apr 2010
Location: phx,az
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 firebird, 85 transam
Engine: 350 SBC Or 7.07 Tonys,305stock
Transmission: Big Ugly, 700r4
Axle/Gears: 4th gen rear disk 3.42 lsd,9 bolt
Re: AFR 195's Eliminator Heads 75cc-#1038-NEW
$1000 shipped?
05-16-2010, 10:57 PM
#32
Junior Member
Thread Starter
iTrader: (4)
Join Date: Apr 2004
Location: Sudbury,Ontario
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am GTA
Engine: 350 TPI
Transmission: 700r4 rebuild, heavy duty clutch pa
Re: AFR 195's Eliminator Heads 75cc-#1038-NEW
I realize we're in a recession but come on lol
05-16-2010, 11:05 PM
#33
Member
Join Date: Apr 2010
Location: phx,az
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 firebird, 85 transam
Engine: 350 SBC Or 7.07 Tonys,305stock
Transmission: Big Ugly, 700r4
Axle/Gears: 4th gen rear disk 3.42 lsd,9 bolt
06-11-2010, 01:57 AM
#35
Member
Join Date: Apr 2010
Location: phx,az
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Car: 84 firebird, 85 transam
Engine: 350 SBC Or 7.07 Tonys,305stock
Transmission: Big Ugly, 700r4
Axle/Gears: 4th gen rear disk 3.42 lsd,9 bolt
Re: AFR 195's Eliminator Heads 75cc-#1038-NEW
Bump to help a fellow 3rd genner
06-12-2010, 01:08 PM
#36
Junior Member
iTrader: (1)
Join Date: May 2006
Location: Calgary, Canada
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Formula
Engine: 355 SBC, AFR 195s
Transmission: T-56 Swap
Axle/Gears: 7.5 Eaton LSD w 4.10s
Re: AFR 195's Eliminator Heads 75cc-#1038-NEW
good location, very interested, pm sent.
06-13-2010, 02:51 PM
#37
Supreme Member
Join Date: Feb 2002
Location: miami, florida
Posts: 1,843
Likes: 0
Received 0 Likes
on
0 Posts
Re: AFR 195's Eliminator Heads 75cc-#1038-NEW
Watching this thread makes me not want to sell my heads. 
The guy is already selling something for a great price and people are still lowballing him.
The guy is already selling something for a great price and people are still lowballing him.
06-13-2010, 04:14 PM
#38
Junior Member
iTrader: (1)
Join Date: May 2006
Location: Calgary, Canada
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Car: '89 Formula
Engine: 355 SBC, AFR 195s
Transmission: T-56 Swap
Axle/Gears: 7.5 Eaton LSD w 4.10s
Re: AFR 195's Eliminator Heads 75cc-#1038-NEW
whats your postal code? if the shipping is reasonable, i'm very interested in negotiating a sale!
06-16-2010, 09:11 PM
#39
Junior Member
Thread Starter
iTrader: (4)
Join Date: Apr 2004
Location: Sudbury,Ontario
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am GTA
Engine: 350 TPI
Transmission: 700r4 rebuild, heavy duty clutch pa
Re: AFR 195's Eliminator Heads 75cc-#1038-NEW
Heads SOLD!!
Thread
Thread Starter
Forum
Replies
Last Post
92projectcamaro
Engine/Drivetrain/Suspension Parts for Sale
11
01-18-2016 08:00 AM
