[Sold] 99 LS1 Partial Engine *SOLD*
02-27-2009, 01:30 AM
#1
99 LS1 Partial Engine *SOLD*
I have a 99 Ls1 longblock I'm looking to sell. It was going to be swapped in to my 88 Iroc but I was laid off and I have to pay bills. It has a spun bearing, i'm not positive if it's a main or rod bearing but I believe it to be a rod bearing as it didnt knock all the time. I have another crank and rods to go with it. I'm not sure what to ask so I'll start at $1000 obo...
it comes with the ls1 intake with fuel rails and injectors and throttle body also. i dont have an f-body oil pan but i have an LS3 oil pan (it may work in a 3rd gen, missed the stock 4th gen kmember by less than 1/2 inch), and pickup to go with it. It has a few sensors left, but count on needing most of them.
Can deliver within 200 miles of ohio 45042 for extra.
it comes with the ls1 intake with fuel rails and injectors and throttle body also. i dont have an f-body oil pan but i have an LS3 oil pan (it may work in a 3rd gen, missed the stock 4th gen kmember by less than 1/2 inch), and pickup to go with it. It has a few sensors left, but count on needing most of them.
Can deliver within 200 miles of ohio 45042 for extra.
Last edited by 87CIZ; 04-13-2009 at 06:51 PM. Reason: engine sold
02-28-2009, 09:36 AM
#5
Member
iTrader: (1)
Join Date: Aug 2005
Location: Portsmouth, Ohio
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Buick Regal T
Axle/Gears: 2.56 blah
Re: 99 LS1 Partial Engine
If this is still around in a couple weeks I am highly interested in it but need to get a car sold first.
Trending Topics
03-18-2009, 09:32 PM
#8
Re: 99 LS1 Partial Engine
yes it is in pieces now though. I disassembled it to find out exactly what was wrong with it as i plan on keeping it. It had a rod bearing spun on the #6 cylinder. So short of the new main bearings i had everything to put it back together. The intake sold, found out it was an LS6 intake. But it's been cleaned, honed, and cam bearings installed. It's ready to go back together. If the offer is right I'll let it go.
03-19-2009, 11:09 AM
#9
Junior Member
Join Date: Feb 2006
Location: Allen, Maryland
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
Re: 99 LS1 Partial Engine
03-19-2009, 08:13 PM
#10
Supreme Member
iTrader: (1)
Join Date: Jun 2006
Location: Guelph, Ontario
Posts: 1,067
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 IROC/05 RX8
Engine: LS1/LS1
Transmission: T56/T56
Axle/Gears: 3.42 GM/3.55 8.8
Re: 99 LS1 Partial Engine
For what its worth, if you run a tubular K, i see no reason why the C6 pan wouldnt work.
Take a look at the baffling inside those things, truely impressive.
Take a look at the baffling inside those things, truely impressive.
04-13-2009, 05:39 PM
#11
Supreme Member
iTrader: (24)
Join Date: Jun 2005
Location: NC
Posts: 7,899
Likes: 0
Received 90 Likes
on
54 Posts
Car: 92 Firebird
Engine: Supercharged 6.0
Transmission: T56
Axle/Gears: 8.8 3.73
Re: 99 LS1 Partial Engine
Parting it out or looking to offload the whole thing?
I need the coolant crossover tubes, waterpump, throttle bracket, and fuel rail
I need the coolant crossover tubes, waterpump, throttle bracket, and fuel rail
Thread
Thread Starter
Forum
Replies
Last Post
IROCZDAVE (88-L98)
Interior Parts for Sale
4
10-06-2016 09:08 AM
[NY] Jamex STB SOLD!!
confucius101
Engine/Drivetrain/Suspension Parts for Sale
3
09-02-2015 03:34 PM
IROCZDAVE (88-L98)
Interior Parts for Sale
0
08-06-2015 03:51 PM
