WTS: Ported TFS 195s and and port matched HSR
#1
WTS: Ported TFS 195s and and port matched HSR
I'm getting out of the thirdgen game and am selling all my project parts. I have a brand new set of TFS 195s I had ported by PortPros of Austin (www.portpros.com) to a Fel Pro 1205 port size, ~203cc. The combustion chambers are 58cc and the valves are Ferrera 2.02/1.60. The valves and seats have a 5 angle valve job. They are fully assembled less studs and guideplates (which I will include) and have Comp Cams 26918 beehive valvesprings good to .600" lift. I will post pics and the flowsheet numbers sometime by this weekend. I'm asking $1300 for the heads. I also have a brand new HSR that I had ported to match these heads (Fel Pro 1205 size ports). The port work involved on an intake this size is considerable, I'm asking $500 for the intake. It is the manifold and plenum only, it does not come with injectors or fuel rails. Thanks for looking. I will include the head to intake gasket as well.
Last edited by Camaroz29; 10-25-2007 at 08:07 PM.
#4
Re: WTS: Ported TFS 195s and and port matched HSR
Pictures
Here are a few of the HSR before porting:
After:
Pics of heads:
And here is a pic of the intake flowsheet, sorry but I must have lost the exhaust side sheet. I had these heads flowed on a 4.00" bore since I was putting them on a 350 and didn't want to see any pumped up 4.060" or 4.125" bore numbers like you usually see published.
Here are a few of the HSR before porting:
After:
Pics of heads:
And here is a pic of the intake flowsheet, sorry but I must have lost the exhaust side sheet. I had these heads flowed on a 4.00" bore since I was putting them on a 350 and didn't want to see any pumped up 4.060" or 4.125" bore numbers like you usually see published.
#13
Junior Member
iTrader: (2)
Join Date: Jan 2007
Location: McSherrystown, PA
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro Z28 IROC
Engine: 305 TPI
Transmission: 700r4
Re: WTS: Ported TFS 195s and and port matched HSR
If it would fit an 87 tpi 305 and you would take 1600 and payments, than will actually be made, then send me a pm, I'll take it.
#24
Member
iTrader: (12)
Join Date: Dec 2005
Location: NY
Posts: 383
Likes: 0
Received 3 Likes
on
2 Posts
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: WTS: Ported TFS 195s and and port matched HSR
interested in the HSR but those are only worth 300 new so what your bottom dollar on that
#26
Member
iTrader: (12)
Join Date: Dec 2005
Location: NY
Posts: 383
Likes: 0
Received 3 Likes
on
2 Posts
Car: 88IROC, 91Z28 + parts cars
Engine: 355, 408
Transmission: T56
Axle/Gears: 3.42 LS1, 9" w/ 4.56 and spool
Re: WTS: Ported TFS 195s and and port matched HSR
sorry both the manifold and the heads are very nice pieces but i can do the same work myself with the equipment i have in the garage. Good luck with the sale anybody building a 383 should jump on this combo
#33
Re: WTS: Ported TFS 195s and and port matched HSR
bump for great seller. recieved the intake today, exactly as pictured, and he threw in a few stickers too.... finally got me a stealth ram. now if i can just find a good deal in a set of fuel rails...
#36
Re: WTS: Ported TFS 195s and and port matched HSR
congrats. if you dont mind me asking, what did you get for them and who did you sell them to? you can PM me if you want. I just ordered my fuel rails tonight. Im stoked about the intake and my 219/219 cam. I think it should be big enough for a 355. comments?
Thread
Thread Starter
Forum
Replies
Last Post