FS: 383short block,eibach's, agx's, sfc's, cams, and more
#1
Junior Member
Thread Starter
Join Date: Feb 2005
Location: Chicago
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 GTA
FS: 383short block,eibach's, agx's, sfc's, cams, and more
I've abandoned my third gen project and moved back to a 4th gen LS1 so this stuffs gotta go!!! All prices are somewhat negotiable, no low ballers please
- I've got a 383 stroker short block that was built from the original roller 350 outta my 89' GTA. It has a maximum of 5K miles on it. It has an Eagle steel crank, GM 5.7" "stage 2" Rods, and Forged Pistons. The rotating assembly was purchased from Speed-O-Motive back a few years ago. It was prof. assembled and balanced by Weimer Machine in Berwyn IL. However despite my efforts to keep it oiled over the last year of sitting it has developed a small amount of light rust in the cylinder walls. Nothing a quick hone job can't take care of, which I may do before it sells. PM me with any questions. I am looking to get $600 for the short block. this will have to be a local pick up item only, sorry.The engine is SOLD
- I also have a 700R4 trans with less then 5K miles on a fresh rebuild. I know it had a corvette servo installed at the time of rebuild and probably a shift kit but cannot not recall. SOLD
- Crane cams 2032 hyd. Roller camshaft. Great cam for stock or modified TPI cars. used less than 5K miles. Still looks new. $160 shipped
- Comp cams XR294HR Hyd. Roller camshaft. Duration @ .050 in.242/exh.248 lift in 540"/exh 562" on a 110 LSA, never got to use this cam, but was told it only had dyno time on it. Also still looks new SOLD
- Kevko 7qt oil Pan with oil pickup part # 1070NRH for sbc. Never used, only opened box for pics. New was $169 sell for $120 shipped
- Crane Cams High-Rev kit, great item to have to help reduce dreaded valve float. $60 shipped
-165 ECU for MAF cars. $65 shipped
- I have 2 Tq converters one is supposed to be a 2500RPM stall and the other 3000 RPM stall. I have not used either one of these so i cannot verify there performance. They do not have any markings on them to suggest who made them. Asking $60 each, prefer pick up these as they're pretty heavy and may not be worth shipping. Both converters SOLD
- Full set of KYB AGX adjustable shocks and struts new in boxes. $320 shipped
- Set of Eibach Pro kit springs. I can't remember how many miles are on them, I bought them used but never took them outta the box. They look unused and very well could be. $150 shipped SOLD
- Set of CGS brand Subframe connectors bolt-in/weld in style. Still new in the box. $130 shipped SOLD
I probably have more stuff that I have forgotten about, and will update this as I find it. thanks for looking.
Located in the Chicago Suburbs, feel free to PM me with any questions or if you need pics of anything.
- I've got a 383 stroker short block that was built from the original roller 350 outta my 89' GTA. It has a maximum of 5K miles on it. It has an Eagle steel crank, GM 5.7" "stage 2" Rods, and Forged Pistons. The rotating assembly was purchased from Speed-O-Motive back a few years ago. It was prof. assembled and balanced by Weimer Machine in Berwyn IL. However despite my efforts to keep it oiled over the last year of sitting it has developed a small amount of light rust in the cylinder walls. Nothing a quick hone job can't take care of, which I may do before it sells. PM me with any questions. I am looking to get $600 for the short block. this will have to be a local pick up item only, sorry.The engine is SOLD
- I also have a 700R4 trans with less then 5K miles on a fresh rebuild. I know it had a corvette servo installed at the time of rebuild and probably a shift kit but cannot not recall. SOLD
- Crane cams 2032 hyd. Roller camshaft. Great cam for stock or modified TPI cars. used less than 5K miles. Still looks new. $160 shipped
- Comp cams XR294HR Hyd. Roller camshaft. Duration @ .050 in.242/exh.248 lift in 540"/exh 562" on a 110 LSA, never got to use this cam, but was told it only had dyno time on it. Also still looks new SOLD
- Kevko 7qt oil Pan with oil pickup part # 1070NRH for sbc. Never used, only opened box for pics. New was $169 sell for $120 shipped
- Crane Cams High-Rev kit, great item to have to help reduce dreaded valve float. $60 shipped
-165 ECU for MAF cars. $65 shipped
- I have 2 Tq converters one is supposed to be a 2500RPM stall and the other 3000 RPM stall. I have not used either one of these so i cannot verify there performance. They do not have any markings on them to suggest who made them. Asking $60 each, prefer pick up these as they're pretty heavy and may not be worth shipping. Both converters SOLD
- Full set of KYB AGX adjustable shocks and struts new in boxes. $320 shipped
- Set of Eibach Pro kit springs. I can't remember how many miles are on them, I bought them used but never took them outta the box. They look unused and very well could be. $150 shipped SOLD
- Set of CGS brand Subframe connectors bolt-in/weld in style. Still new in the box. $130 shipped SOLD
I probably have more stuff that I have forgotten about, and will update this as I find it. thanks for looking.
Located in the Chicago Suburbs, feel free to PM me with any questions or if you need pics of anything.
Last edited by gmoney1082; 05-02-2007 at 09:12 PM.
#2
Supreme Member
iTrader: (2)
Re: FS: 383short block,eibach's, agx's, sfc's, cams, and more
[QUOTE=
- Crane Cams High-Rev kit, great item to have to help reduce dreaded valve float. $60 shipped
.[/QUOTE]
what is this part? ignition coil, rev limiter? also do you have a pic of it. and could you get a shipping quote to 68113?
- Crane Cams High-Rev kit, great item to have to help reduce dreaded valve float. $60 shipped
.[/QUOTE]
what is this part? ignition coil, rev limiter? also do you have a pic of it. and could you get a shipping quote to 68113?
#4
Junior Member
Thread Starter
Join Date: Feb 2005
Location: Chicago
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 GTA
Re: FS: 383short block,eibach's, agx's, sfc's, cams, and more
the rev kit attatches to your cylinder heads to keep extra pressure on your lifters. Pm me with an email address and i'll send you some pics.
Formula350: the SubFrames are the only item I do not have pics of yet. Sorry, I'll try and get some ASAP
Formula350: the SubFrames are the only item I do not have pics of yet. Sorry, I'll try and get some ASAP
#5
Senior Member
iTrader: (2)
Join Date: Apr 2003
Location: Lombard Il
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Formula
Engine: 383 vortec tpi
Transmission: t56 woot
Re: FS: 383short block,eibach's, agx's, sfc's, cams, and more
oll man thanks maybe tuesday I can run out by you and look at them ....... What brand are they?
#6
Supreme Member
iTrader: (1)
Join Date: Mar 2000
Location: All over China, Iowa, and San Luis Obispo, CA
Posts: 1,692
Likes: 0
Received 1 Like
on
1 Post
Car: 92 Form, 91 Z28, 89 GTA, 86 Z28
Engine: 5.7 TPI, LG4
Transmission: 700R4, 700R4
Axle/Gears: 3.27, 2.73
Re: FS: 383short block,eibach's, agx's, sfc's, cams, and more
PM sent about 383, 700, and a converter. Hoping to see pics. Thanks.
#7
Member
iTrader: (13)
Join Date: Feb 2006
Location: Dexter MO
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Z28
Engine: 406
Transmission: TH350
Axle/Gears: 9-inch w/ 3.50 posi
Re: FS: 383short block,eibach's, agx's, sfc's, cams, and more
PM sent on rev kit and oil pan. Hope to see some pics.
Trending Topics
#9
Member
iTrader: (10)
Join Date: Sep 2005
Location: Elgin, IL
Posts: 235
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 z28, 07 Silverado
Engine: LS1, 5.3
Transmission: T56
Axle/Gears: 3.73, 3.23
Re: FS: 383short block,eibach's, agx's, sfc's, cams, and more
Vey interested in the springs. would like some pics to bobbyss23@aol.com. Where are you located in chicago?
Last edited by simz28; 04-02-2007 at 07:56 AM.
#10
Junior Member
Thread Starter
Join Date: Feb 2005
Location: Chicago
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 GTA
Re: FS: 383short block,eibach's, agx's, sfc's, cams, and more
PM'd you
----------
Vey interested in the springs. would like some pics to bobbyss23@aol.com. Where are you located in chicago?
PM'd you
Last edited by gmoney1082; 04-02-2007 at 06:37 PM. Reason: Automerged Doublepost
#11
Member
iTrader: (4)
Join Date: Nov 2006
Location: Joliet IL
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Iroc Z28
Engine: 350 HSR
Transmission: 700r4
Axle/Gears: 3.27 Borg Warner 9bolt
Re: FS: 383short block,eibach's, agx's, sfc's, cams, and more
Any word on the 2500 converter? Still intrested
#12
Junior Member
iTrader: (4)
Join Date: Apr 2004
Location: Sudbury,Ontario
Posts: 22
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Trans Am GTA
Engine: 350 TPI
Transmission: 700r4 rebuild, heavy duty clutch pa
Re: FS: 383short block,eibach's, agx's, sfc's, cams, and more
springs still for sale? If so let me know
#13
Junior Member
iTrader: (1)
Join Date: Jun 2006
Location: Canada
Posts: 61
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 camaro iroc-z
Engine: 350 4 brrl
Transmission: B&W T5
Axle/Gears: B&W 9 bolt 3.45
Re: FS: 383short block,eibach's, agx's, sfc's, cams, and more
interested in any pics of sfc's what brand are they. how much to ship to P1L 1X4 canada. thanks
#15
Senior Member
iTrader: (3)
Join Date: Apr 2006
Location: Hammond IN
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 RS convertible
Engine: 305 TBI LO3
Transmission: TH-700-R4
Axle/Gears: stock axles 3.73 LSD
Re: FS: 383short block,eibach's, agx's, sfc's, cams, and more
may be interested in sfc's if they will fit on a vert. do you still have the springs?
#16
Junior Member
Thread Starter
Join Date: Feb 2005
Location: Chicago
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 GTA
Re: FS: 383short block,eibach's, agx's, sfc's, cams, and more
There is a sale pending on the springs, I'll let you know if it falls through, thanks
----------
SFC's will not fit Verts, sorry.
----------
SFC's will not fit Verts, sorry.
Last edited by gmoney1082; 04-04-2007 at 06:09 PM. Reason: Automerged Doublepost
#17
Senior Member
iTrader: (3)
Join Date: Apr 2006
Location: Hammond IN
Posts: 518
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 RS convertible
Engine: 305 TBI LO3
Transmission: TH-700-R4
Axle/Gears: stock axles 3.73 LSD
Re: FS: 383short block,eibach's, agx's, sfc's, cams, and more
sounds good. do you know if those sfc's will work on my car?
#18
Junior Member
Thread Starter
Join Date: Feb 2005
Location: Chicago
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 GTA
#19
Junior Member
Thread Starter
Join Date: Feb 2005
Location: Chicago
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 GTA
Re: FS: 383short block,eibach's, agx's, sfc's, cams, and more
Update: SFC's and 2500 Stall are SOLD
Eibach Springs are SOLD
Eibach Springs are SOLD
Last edited by gmoney1082; 04-05-2007 at 06:10 PM.
#21
On Probation
Join Date: Apr 2006
Location: Albany, NY
Posts: 491
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1992 Pontaic Firebird
Engine: 3.1L
Transmission: auto
Axle/Gears: 4 spd
Re: FS: 383short block,eibach's, agx's, sfc's, cams, and more
how much for the shocks and struts shipped to 12019, ny please? r they for a v8 ?
#23
Member
iTrader: (1)
Join Date: Feb 2007
Location: Frankfort,Il (Chicago)
Posts: 108
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 Iroc Z28
Engine: TPI 5.0
Transmission: 700R4
Axle/Gears: Stock
Re: FS: 383short block,eibach's, agx's, sfc's, cams, and more
darn, when will i ever get my car up and running. I really needed that 383 and would of paid more money for the gmoney man
#25
Senior Member
Join Date: Aug 2001
Location: Stafford CT
Posts: 627
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 Camaro SC
Engine: LT1 SBC
Transmission: LT1 T56
Axle/Gears: 3.73 Moser 12 Bolt
Re: FS: 383short block,eibach's, agx's, sfc's, cams, and more
Please email pics of the rev kid to theronmaull@yahoo.com -- I'm building a 302 and could use it
Tyler
Tyler
#26
Junior Member
Thread Starter
Join Date: Feb 2005
Location: Chicago
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 GTA
Re: FS: 383short block,eibach's, agx's, sfc's, cams, and more
Please email pics of the rev kid to theronmaull@yahoo.com -- I'm building a 302 and could use it
Tyler
Tyler
#28
Junior Member
Thread Starter
Join Date: Feb 2005
Location: Chicago
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 GTA
Re: FS: 383short block,eibach's, agx's, sfc's, cams, and more
Couple Items left guys, this stuff goes to ebay if it doesn't sell here soon......... check it out
#29
Senior Member
iTrader: (2)
Join Date: Apr 2003
Location: Lombard Il
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Formula
Engine: 383 vortec tpi
Transmission: t56 woot
Re: FS: 383short block,eibach's, agx's, sfc's, cams, and more
Hey man you got thoes rims you said you may have if so i'm interested
#30
Junior Member
Thread Starter
Join Date: Feb 2005
Location: Chicago
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1989 GTA
Thread
Thread Starter
Forum
Replies
Last Post
gixxer92
Engine/Drivetrain/Suspension Parts for Sale
5
09-01-2015 04:32 PM