CamaroCris

I have a 1992 camaro that has been hacked up a bit on the interior wiring side. rather than chase shorts and or cut wires i would rather install a new wiring harness, I can only do it from 90-92 because of the gauges correct? I have no power windows or rear hatch opener. If you have a harness for sale please contact me.

ratfink6923

iTrader: (2)

I have a power window 92 harness still in car that hasn't been molested aside from the stereo connections.
where are you located?

CamaroCris

Nice! I would be into one with power windows and power seats if im correct im trying to make my RS into a Z28 clone. I am located in denver,co

ratfink6923

iTrader: (2)

This was a manual seat car with rear defrost. Adding the power for the seat is relatively easy.
if you don't come up with anything let me know, I'd have to pull it yet.

CamaroCris

okay that sounds good to me, was the car an auto or a manual?

ratfink6923

iTrader: (2)

Automatic car. 305 tbi. Power windows/locks/hatch release. Rear defrost. Cruise control. Intermittent wipers. Standard dome light. Base radio/rearview mirror (non lighted) vats car obviously. I'll throw in the vats and cruise modules if you'd like, I don't need them.
the stereo harness I think was cut. I have to check.

CamaroCris

do you know if it would make a difference since my car is a manual? highly doubt it but just want to make sure i buy the right harness the first time.

ratfink6923

iTrader: (2)

There will be different connections for clutch pedal and backup lights. The backup lights may be engine harness side though, I'll have to check.

CamaroCris

Didn't think about that let me see if i can find one that will go directly into my car, if not ill buy yours and adapt those connections from my original harness.