SALE Group Purchase Custom Battery Cables
#1
Supreme Member
Thread Starter
Join Date: Jul 2006
Location: 212 is up in this Bit@#
Posts: 2,763
Received 739 Likes
on
565 Posts
Car: Resto-Mod 1987 IROC-Z Clone
Engine: Alky fed L92 Vortec Twin-Turbo 6.8L
Transmission: My own built/ design 4L80M
Axle/Gears: Custom 12 bolt (4.10:1)
SALE Group Purchase Custom Battery Cables
One of my Vendors is having a Sale for Large/ Group Purchases of Custom (Motorsports Grade.) Battery Cables/ Alternator Cables/ Power Cables.
I am looking to see if there is any interest here.
The SALE is now TEMPORARILY 40% of Retail Pricing.
WARNING! Even with a Sale... Motorsports Grade Cables are not cheap!
The complete Order has to be in by January 15th.
If there is enough interest here/ a large enough group for the Sale to take place...
I will Post information regarding how to make payment and shipping arrangements.
At this time, there is NO guaranty that this Sale will take place.
The Engine Compartment Cables are made of 2 AWG Motorsports Grade Cable, and the Cables for Remote Batteries are 0 AWG.
Post the Length (from the end of one Terminal to the other Terminal) of each Cable required.
I will PM you an approximate Price.
Cables can be Terminated with the Terminals and Boots shown in the Image below (Top Mount Terminals are not available, but adapters are available).
Post if you would like a Battery Terminal and Boot, an Alternator Terminal and Boot, or a Power Distribution Terminal and Boot at one end of the Cable, and then the other end.
Examples of Terminals and Boots shown below:
Optional Battery Cable Bolt Covers (shown above) are available.
A choice of Boot for Power Distribution Terminals are available (Boot on the Left or the Right).
The Cables will be finished in Techflex Braided Sleeving (Black).
My Vendor does not install the Sleeving, it is supplied separately... so I will be installing the Sleeving and Boots for you.
You may also receive the Sleeving and Boots separate if you wish.
Example of Sleeving shown below:
I am looking to see if there is any interest here.
The SALE is now TEMPORARILY 40% of Retail Pricing.
WARNING! Even with a Sale... Motorsports Grade Cables are not cheap!
The complete Order has to be in by January 15th.
If there is enough interest here/ a large enough group for the Sale to take place...
I will Post information regarding how to make payment and shipping arrangements.
At this time, there is NO guaranty that this Sale will take place.
The Engine Compartment Cables are made of 2 AWG Motorsports Grade Cable, and the Cables for Remote Batteries are 0 AWG.
Post the Length (from the end of one Terminal to the other Terminal) of each Cable required.
I will PM you an approximate Price.
Cables can be Terminated with the Terminals and Boots shown in the Image below (Top Mount Terminals are not available, but adapters are available).
Post if you would like a Battery Terminal and Boot, an Alternator Terminal and Boot, or a Power Distribution Terminal and Boot at one end of the Cable, and then the other end.
Examples of Terminals and Boots shown below:
Optional Battery Cable Bolt Covers (shown above) are available.
A choice of Boot for Power Distribution Terminals are available (Boot on the Left or the Right).
The Cables will be finished in Techflex Braided Sleeving (Black).
My Vendor does not install the Sleeving, it is supplied separately... so I will be installing the Sleeving and Boots for you.
You may also receive the Sleeving and Boots separate if you wish.
Example of Sleeving shown below:
Last edited by vorteciroc; 12-23-2022 at 01:15 AM.
The following users liked this post:
TTOP350 (12-18-2022)
#2
COTM Editor
iTrader: (22)
Join Date: Mar 2001
Posts: 9,929
Likes: 0
Received 1,860 Likes
on
1,274 Posts
Car: '89 Firebird
Engine: 7.0L
Transmission: T56
Re: SALE Group Purchase Custom Battery Cables
Argh... I want to redo my battery cables and even bought a dual post battery, but I haven't planned it out yet and don't know how I want it configured. I'll probably miss the timeline.
#3
Supreme Member
Thread Starter
Join Date: Jul 2006
Location: 212 is up in this Bit@#
Posts: 2,763
Received 739 Likes
on
565 Posts
Car: Resto-Mod 1987 IROC-Z Clone
Engine: Alky fed L92 Vortec Twin-Turbo 6.8L
Transmission: My own built/ design 4L80M
Axle/Gears: Custom 12 bolt (4.10:1)
Re: SALE Group Purchase Custom Battery Cables
In the future, if you need a Dual-Post Battery (or Triple)...
Just purchase an XSPower Battery (The ONLY Batteries that I will ever buy)...
They are designed with Bolt-On Posts (location the top) which use different Adapters to fit different needs.
Example:
Side Post Adapters (that can also be used as a Dual-Post config.):
Dual-Post (on Top):
Triple-Post (Side and Two Top Posts):
Just purchase an XSPower Battery (The ONLY Batteries that I will ever buy)...
They are designed with Bolt-On Posts (location the top) which use different Adapters to fit different needs.
Example:
Side Post Adapters (that can also be used as a Dual-Post config.):
Dual-Post (on Top):
Triple-Post (Side and Two Top Posts):
Last edited by vorteciroc; 12-18-2022 at 02:52 AM.
The following users liked this post:
TTOP350 (12-18-2022)
#4
Supreme Member
Thread Starter
Join Date: Jul 2006
Location: 212 is up in this Bit@#
Posts: 2,763
Received 739 Likes
on
565 Posts
Car: Resto-Mod 1987 IROC-Z Clone
Engine: Alky fed L92 Vortec Twin-Turbo 6.8L
Transmission: My own built/ design 4L80M
Axle/Gears: Custom 12 bolt (4.10:1)
Re: SALE Group Purchase Custom Battery Cables
BUMP!
Merry Christmas!!!
The SALE is now TEMPORARILY 40% of Retail Pricing.
Merry Christmas!!!
The SALE is now TEMPORARILY 40% of Retail Pricing.
Last edited by vorteciroc; 12-23-2022 at 01:25 AM.
Thread
Thread Starter
Forum
Replies
Last Post