BraveTECH - Factory Window Switch Adapter (Auto Up/ Down) Plug N Play
#1
Former Sponsor
Thread Starter
Join Date: Jul 2022
Location: Medicine Hat
Posts: 79
Likes: 0
Received 17 Likes
on
10 Posts
Car: 1990 GTA
Engine: 5.7
BraveTECH - Factory Window Switch Adapter (Auto Up/ Down) Plug N Play
I designed these Plug N Play adapters that provide an Auto Up/Down Feature to your factory switches. It's fairy compact and fits well in the center console.
Available on my website: https://bravetech.ca/
Available on my website: https://bravetech.ca/
The following 3 users liked this post by BraveTECH:
#3
Supreme Member
iTrader: (1)
Join Date: Feb 2003
Location: Austin, Tx
Posts: 1,494
Received 57 Likes
on
42 Posts
Car: 91 Z28
Engine: LS1
Transmission: T-56
Axle/Gears: 3.73 Hawks 8.8
Re: BraveTECH - Factory Window Switch Adapter (Auto Up/ Down) Plug N Play
I was the one that mentioned wanting a more stock switch look, and you delivered. Order is placed!
#4
Former Sponsor
Thread Starter
Join Date: Jul 2022
Location: Medicine Hat
Posts: 79
Likes: 0
Received 17 Likes
on
10 Posts
Car: 1990 GTA
Engine: 5.7
Re: BraveTECH - Factory Window Switch Adapter (Auto Up/ Down) Plug N Play
Thank you @StevenK I really appreciate your business =)
I did design the programming to accommodate worn switches but please ensure your factory switches are new, or in good condition, internally.
It is a fairly new program, so if you have any troubles at all, please email me at Bravendirk@gmail.com
You can also Follow / Contact me on Facebook: BraveTECH Custom Electronics
I'm a very small business. I would really appreciate any and all sharing of my products =)
Background information, if you are curious: The programming was a bit of a task to write because worn out switches have "Dead Spots" when depressing the switch. My electronics are very precise and will see every "dead spot" that occurs while the factory switch transitions from a "Not Pressed" state to a "Pressed" state. The program will see this as pressing and releasing the switch very rapidly. I wrote the program to filter out this "noise" and provide a steady and reliable output.
Braven
I did design the programming to accommodate worn switches but please ensure your factory switches are new, or in good condition, internally.
It is a fairly new program, so if you have any troubles at all, please email me at Bravendirk@gmail.com
You can also Follow / Contact me on Facebook: BraveTECH Custom Electronics
I'm a very small business. I would really appreciate any and all sharing of my products =)
Background information, if you are curious: The programming was a bit of a task to write because worn out switches have "Dead Spots" when depressing the switch. My electronics are very precise and will see every "dead spot" that occurs while the factory switch transitions from a "Not Pressed" state to a "Pressed" state. The program will see this as pressing and releasing the switch very rapidly. I wrote the program to filter out this "noise" and provide a steady and reliable output.
Braven
The following users liked this post:
91banditt2 (11-08-2022)
#6
Supreme Member
iTrader: (1)
Join Date: Feb 2003
Location: Austin, Tx
Posts: 1,494
Received 57 Likes
on
42 Posts
Car: 91 Z28
Engine: LS1
Transmission: T-56
Axle/Gears: 3.73 Hawks 8.8
Re: BraveTECH - Factory Window Switch Adapter (Auto Up/ Down) Plug N Play
Thank you @StevenK I really appreciate your business =)
I did design the programming to accommodate worn switches but please ensure your factory switches are new, or in good condition, internally.
It is a fairly new program, so if you have any troubles at all, please email me at Bravendirk@gmail.com
You can also Follow / Contact me on Facebook: BraveTECH Custom Electronics
I'm a very small business. I would really appreciate any and all sharing of my products =)
Background information, if you are curious: The programming was a bit of a task to write because worn out switches have "Dead Spots" when depressing the switch. My electronics are very precise and will see every "dead spot" that occurs while the factory switch transitions from a "Not Pressed" state to a "Pressed" state. The program will see this as pressing and releasing the switch very rapidly. I wrote the program to filter out this "noise" and provide a steady and reliable output.
Braven
I did design the programming to accommodate worn switches but please ensure your factory switches are new, or in good condition, internally.
It is a fairly new program, so if you have any troubles at all, please email me at Bravendirk@gmail.com
You can also Follow / Contact me on Facebook: BraveTECH Custom Electronics
I'm a very small business. I would really appreciate any and all sharing of my products =)
Background information, if you are curious: The programming was a bit of a task to write because worn out switches have "Dead Spots" when depressing the switch. My electronics are very precise and will see every "dead spot" that occurs while the factory switch transitions from a "Not Pressed" state to a "Pressed" state. The program will see this as pressing and releasing the switch very rapidly. I wrote the program to filter out this "noise" and provide a steady and reliable output.
Braven
Trending Topics
#8
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,734
Received 795 Likes
on
528 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: BraveTECH - Factory Window Switch Adapter (Auto Up/ Down) Plug N Play
Pretty darn cool. Cool stuff on your site to. Just add another project to my list
Thread
Thread Starter
Forum
Replies
Last Post