The light bulb all the way on the left of my driver’s tail lamp went out so I replaced it with a new bulb a couple months ago. Noticed it went out again the other day and after some trouble shooting got it to turn back on again. However, it would be as bright as when the brake pedal is pressed normally and would get dimmer when the pedal was actually pressed. It stopped working again a couple minutes later.

All other lights work properly (except for the front driver’s parking light which doesn’t turn on but the turn signal works, but I’m guessing that’s a separate issue). All fuses look fine as well. Any chance it’s just the brake light socket or is it something more? Car is an 87 base

Reply Like

10-30-2022, 12:34 PM

sofakingdom

Supreme Member

iTrader: (1)

Join Date: Sep 2005

Posts: 26,123

Likes: 1

Received 1,688 Likes on 1,283 Posts

Car: Yes

Engine: Usually

Transmission: Sometimes

Axle/Gears: Behind me somewhere

Re: Brake light issue

Sounds like you have the bulb in the socket backwards. And/or, the socket is fornicated.

You can get new sockets hanging on a card at the parts store.

Reply Like

The following 2 users liked this post by sofakingdom:

KITT87 (10-31-2022), vorteciroc (10-30-2022)

10-31-2022, 10:17 PM

KITT87

Member

Thread Starter

Join Date: Jun 2021

Posts: 215

Likes: 67

Received 44 Likes on 34 Posts

Car: ‘87 Base Firebird

Engine: 2.8 V6

Transmission: 700r4

Axle/Gears: 3.42

Re: Brake light issue

Quote:

Originally Posted by sofakingdom

Sounds like you have the bulb in the socket backwards. And/or, the socket is fornicated.

You can get new sockets hanging on a card at the parts store.

Turns out the light was in backwards

that’s going up there on the dumbest mistakes list. Thanks for the help!