how to get cruise control working after engine swap.
#1
Supreme Member
Thread Starter
Join Date: Jul 2007
Location: Howard Lake, MN
Posts: 1,293
Likes: 0
Received 4 Likes
on
4 Posts
Car: 86 Camaro
Engine: 355- hopefully a 5.3 this summer
Transmission: 700r4
Axle/Gears: 3.42
how to get cruise control working after engine swap.
swapped a 5.3 with a Holley TerminatorX into my 89 IROC. got the cruise control cable hooked up to the throttle body, but can anyone tell me what wires to hook up to what to get the cruise working again?
it's a really nice thing to have on long interstate jaunts..
it's a really nice thing to have on long interstate jaunts..
#2
Supreme Member
Thread Starter
Join Date: Jul 2007
Location: Howard Lake, MN
Posts: 1,293
Likes: 0
Received 4 Likes
on
4 Posts
Car: 86 Camaro
Engine: 355- hopefully a 5.3 this summer
Transmission: 700r4
Axle/Gears: 3.42
Re: how to get cruise control working after engine swap.
so no one has gotten the factory cruise control to work as a standalone setup?
#3
TGO Supporter
Re: how to get cruise control working after engine swap.
#4
Moderator
iTrader: (5)
Re: how to get cruise control working after engine swap.
https://www.thirdgen.org/forums/engi...-function.html
JamesC
Last edited by JamesC; 07-21-2022 at 10:22 PM.
#5
Supreme Member
Re: how to get cruise control working after engine swap.
Well, I'm unsure I fully understand, but I'll throw this info your way. I swapped in a 350 and removed the computer, which grounds the CC. A reground did the trick. If that's the least bit helpful, the following link shows what I did:
https://www.thirdgen.org/forums/engi...-function.html
JamesC
https://www.thirdgen.org/forums/engi...-function.html
JamesC
#7
Supreme Member
Thread Starter
Join Date: Jul 2007
Location: Howard Lake, MN
Posts: 1,293
Likes: 0
Received 4 Likes
on
4 Posts
Car: 86 Camaro
Engine: 355- hopefully a 5.3 this summer
Transmission: 700r4
Axle/Gears: 3.42
Re: how to get cruise control working after engine swap.
looks like one other guy already answered the question.
Trending Topics
#8
Supreme Member
Thread Starter
Join Date: Jul 2007
Location: Howard Lake, MN
Posts: 1,293
Likes: 0
Received 4 Likes
on
4 Posts
Car: 86 Camaro
Engine: 355- hopefully a 5.3 this summer
Transmission: 700r4
Axle/Gears: 3.42
Re: how to get cruise control working after engine swap.
Well, I'm unsure I fully understand, but I'll throw this info your way. I swapped in a 350 and removed the computer, which grounds the CC. A reground did the trick. If that's the least bit helpful, the following link shows what I did:
https://www.thirdgen.org/forums/engi...-function.html
JamesC
https://www.thirdgen.org/forums/engi...-function.html
JamesC
that will cross off one more thing on my list to make the car as functional as it was with the stock TPI 350..
next up is the AC..
#9
Supreme Member
Thread Starter
Join Date: Jul 2007
Location: Howard Lake, MN
Posts: 1,293
Likes: 0
Received 4 Likes
on
4 Posts
Car: 86 Camaro
Engine: 355- hopefully a 5.3 this summer
Transmission: 700r4
Axle/Gears: 3.42
Re: how to get cruise control working after engine swap.
finally got this done today.
simply grounded the black wire with a white stripe in the plug down by where the ecm was and the cruise works perfectly now.
simply grounded the black wire with a white stripe in the plug down by where the ecm was and the cruise works perfectly now.
Thread
Thread Starter
Forum
Replies
Last Post