Electronics Need help wiring something up? Thinking of adding an electrical component to your car? Need help troubleshooting that wiring glitch?

Will not turn over at 200deg F

Thread Tools
 
Search this Thread
 
Old 06-28-2021, 01:07 PM
  #1  
Junior Member
Thread Starter
 
shivey1's Avatar
 
Join Date: Oct 2012
Location: Arkansas City, Kansas
Posts: 1
Likes: 0
Received 4 Likes on 2 Posts
Car: 1990 TRANS AM GTA
Engine: 305 HO TPI
Transmission: 5 speed Manual
Will not turn over at 200deg F

Good day
I have a 1990 Trans Am GTA 5speed, 305 TPI.
The problem is after reaching operating temperature (185deg F) and turn the car off, and if the engine temperature raises at or above 200deg F the car will not turn over until the engine temperature drops below 185deg F. When I try to start the car at 200deg F the voltage gage shows 12-13 + volts until I turn the key to start and then it drops below 10 volts. At 200deg F + I can jumpstart it and or push start it with no issues (Starts right up). I replaced the battery (No change)
So before I go nuts and start replacing all kind of stuff like + and - battery cables, starter, and whatever I figured I ask if anyone has seen or had this issue.
Old 06-28-2021, 02:59 PM
  #2  
Supreme Member

 
ironwill's Avatar
 
Join Date: Jan 2008
Posts: 1,034
Received 420 Likes on 301 Posts
Car: 1986 IROC Z
Engine: 5.0 TPI
Transmission: 700R4
Axle/Gears: 3.23 Posi
Re: Will not turn over at 200deg F

Originally Posted by shivey1
Good day
I have a 1990 Trans Am GTA 5speed, 305 TPI.
The problem is after reaching operating temperature (185deg F) and turn the car off, and if the engine temperature raises at or above 200deg F the car will not turn over until the engine temperature drops below 185deg F. When I try to start the car at 200deg F the voltage gage shows 12-13 + volts until I turn the key to start and then it drops below 10 volts. At 200deg F + I can jumpstart it and or push start it with no issues (Starts right up). I replaced the battery (No change)
So before I go nuts and start replacing all kind of stuff like + and - battery cables, starter, and whatever I figured I ask if anyone has seen or had this issue.
I would suspect the starter, but before I bought one, I'd pull the old one and look it over for loose bushings/worn brushes/worn commutator, loose or corroded field windings, etc. for the 'smoking gun' indicating that it is the culprit.

Additionally, check all connections, especially grounds, for corrosion and looseness.
Old 06-28-2021, 03:01 PM
  #3  
Supreme Member

 
vorteciroc's Avatar
 
Join Date: Jul 2006
Location: 212 is up in this Bit@#
Posts: 2,763
Received 739 Likes on 565 Posts
Car: Resto-Mod 1987 IROC-Z Clone
Engine: Alky fed L92 Vortec Twin-Turbo 6.8L
Transmission: My own built/ design 4L80M
Axle/Gears: Custom 12 bolt (4.10:1)
Re: Will not turn over at 200deg F

The first thing to inspect is the large Ground-Cable from the Negative-Post of the Battery to the Cylinder-Block.
If is is loose or damaged...
The Starter-Motor may not have enough Current to start the Engine.
Especially if Electric-Fans are ON at this time.
Old 06-28-2021, 03:06 PM
  #4  
Supreme Member

 
vorteciroc's Avatar
 
Join Date: Jul 2006
Location: 212 is up in this Bit@#
Posts: 2,763
Received 739 Likes on 565 Posts
Car: Resto-Mod 1987 IROC-Z Clone
Engine: Alky fed L92 Vortec Twin-Turbo 6.8L
Transmission: My own built/ design 4L80M
Axle/Gears: Custom 12 bolt (4.10:1)
Re: Will not turn over at 200deg F

I have seen Vehicles crank and start with the main Ground-Cable disconnected, and the Engine completely cold.
What would happen is...
The smaller Ground-Straps would provide enough Current for the Starter to crank, with a cold Engine and minimal Electric Components on.

Good luck, hopefully it is simple to find and fix.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
89_KITT
Electronics
4
07-09-2009 10:24 AM
venom204
Tech / General Engine
2
03-19-2009 08:03 PM
kbomb84rs
Tech / General Engine
5
08-21-2008 05:02 PM
Joker1232
Electronics
6
11-19-2007 12:24 PM
Mike92RS
Tech / General Engine
1
06-12-2002 03:33 PM



Quick Reply: Will not turn over at 200deg F



All times are GMT -5. The time now is 11:14 AM.