Wire clip part number?
#1
Junior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2014
Location: Boston, MA
Posts: 47
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Trans Am
Engine: L69
Transmission: T5
Wire clip part number?
Does anyone know the part number for this wire clip? It's used on the doors, speaker wire, dome lamp wire, etc. Hoping to find a match for the originals with the ribbed interior to really hold the wires in place.
Thanks!
Thanks!
#2
Supreme Member
iTrader: (58)
Re: Wire clip part number?
I'm not going to go digging for the part number. 99% of the original part numbers are long since discontinued. I'd go to the Auveco website and browse their catalog for something similar. Once you have an Auveco number, you can search for that number with Google or on Ebay to find a vendor. Chances are good the exact clip is obsolete, but you can probably find something that will work.
#3
Junior Member
iTrader: (3)
Join Date: Jul 2009
Location: PA
Posts: 47
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1986 Trans-Am
Engine: 305 4BBL
Transmission: THM 700 R4
Axle/Gears: 2.73 Stock
Re: Wire clip part number?
@jdhh74 were you able to find something suitable? I browsed the auveco site as suggested and I didn't notice anything even remotely close.
I have at least 1 or 2 of these that were brittle enough to break in half as I was running the dome light wires, and I need something to replace the pinch type clips on the speaker wires as they run from the floor up to the speaker itself, which I believe this type of clip would suffic.
I have at least 1 or 2 of these that were brittle enough to break in half as I was running the dome light wires, and I need something to replace the pinch type clips on the speaker wires as they run from the floor up to the speaker itself, which I believe this type of clip would suffic.
#4
Junior Member
Thread Starter
iTrader: (2)
Join Date: Jan 2014
Location: Boston, MA
Posts: 47
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Trans Am
Engine: L69
Transmission: T5
Re: Wire clip part number?
I was not able to find a new replacement. I was lucky enough to find a cheap NOS GM wire harness on eBay that had 4 of the clips on it so I bought that and used those.
Thread
Thread Starter
Forum
Replies
Last Post