need help with heater blower motor wiring
#1
need help with heater blower motor wiring
I did an la swap. problem is I did what pocket told me not to do. I cut my old harness before everything was sorted. stereo works, console lights, everything basically works except the horn, heater. compressors not in, but not deleted. can someone help me fix this plz. it's getting cold down south. thanks
wires from blower
Last edited by hugdaturns; 11-14-2017 at 03:25 AM. Reason: bad title
#2
Supreme Member
iTrader: (167)
Re: need help with heater blower motor wiring
Red wire gets full time power; Should have originally come from the starter post, thru a fusible link, and up to the cut wire shown in your picture.
Black wire is ground for the motor and the relay. Splice an "EYE" at the end of that wire & screw it to the body.
Blue wire: IIRC ( AKA = I THINK! ) is AC signal from the AC pressure switch. Double check to be sure !
So; connect power and ground, then try to turn on the blower.
Black wire is ground for the motor and the relay. Splice an "EYE" at the end of that wire & screw it to the body.
Blue wire: IIRC ( AKA = I THINK! ) is AC signal from the AC pressure switch. Double check to be sure !
So; connect power and ground, then try to turn on the blower.