No crank but clicking
11-19-2014, 08:57 PM
#1
Junior Member
Thread Starter
Join Date: Nov 2014
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
No crank but clicking
So ive been working on my instrument cluster and I had the door (light on too) open for 4+ hours and I tried to start it today but I only get a clicking noise. Ive researched a little bit and it seems to be the starter or the starter solenoid, but since I was down in the wires under the steering wheel could I have of maybe disconnected something on accident. Battery is fully charged, I tried to jump the car but nothing either. The car always had a rough time starting so I suspect its the starter or starter solenoid and if it is what brand should I buy or you recommend? 
11-22-2014, 05:15 PM
#3
Supreme Member
Join Date: Dec 2000
Location: stallings,n.c.
Posts: 1,271
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 camaro rs convertable
Engine: 305 tbi
Transmission: 700r4
Axle/Gears: 7.5"3.42 gears forth gen 2000 camar
Re: No crank but clicking
make sure the battery terminals are clean.
12-15-2014, 02:29 PM
#4
Re: No crank but clicking
You killed the battery. Charge it up or take it out and have it tested to verify. The "clicking but no start" is a dead giveaway. If that doesn't fix it, as mentioned, make sure all your connections car tight as a poor connection can cause the same issue.
Thread
Thread Starter
Forum
Replies
Last Post
skinny z
Engine/Drivetrain/Suspension Parts for Sale
5
10-05-2015 06:23 PM
Linson
Auto Detailing and Appearance
12
10-01-2015 09:50 PM