Fronzizzle

Hello,

My turn left turn signal doesn't cancel, so I bought a new cancel cam and am hoping to install it today.

When I bought the car, it had an aftermarket Grant wheel on it, which I replaced. I just took the wheel back off, but I'm not sure how to continue - see attached pick.

Does this piece come off with a steering wheel puller? I think once I get that off, I have to depress the lock plate to the cancel cam. I have the lock plate tool and I have access to a steering wheel puller, I just want to make sure I do this correctly. Thanks.

Blue1990camaro

iTrader: (1)

yea mine had a grant one with the same piece your refering to, i had to gently tug on it with a puller to get it off, it just slides onto the splines on the steering shaft

Fronzizzle

Okay, thanks for the quick reply. I'm off to borrow the steering wheel puller so I can this.

I just realized that my horn has never worked, either - might be a good time to look into that as well although I don't know if I still have the stuff that came with my Grant wheel.

Lurbie

iTrader: (3)

Just as a side note, I doubt it is your cancel cam. That's just a piece of plastic. Unless it's busted when you get in there, I'd look for a spring to be missing off of your turn signal switch.

Blue1990camaro

iTrader: (1)

anytime, and u can order all the stuff u need directly from grant if your missing anything, all i needed was the adapter kit and it all went right together, which wheel do u have?


and yes i agree for a missing spring also.