intellitronx fuel gauge problems
#1
Junior Member
Thread Starter
iTrader: (1)
Join Date: Aug 2013
Location: Savage, MN
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Car: '87 Camaro
intellitronx fuel gauge problems
Sorry for posting this in the carburetor section.
I just used a multi meter on the one wire coming out of the gas tank (because my car was swapped to a carb 350 by the last owner) and found that it was reading 69.5 ohms. When i measured the voltage on the pink wire coming from the dash it measured 5 volts. I thought the gas tanks operated on about 3 volts. If thats true how could i lower the current?
I just used a multi meter on the one wire coming out of the gas tank (because my car was swapped to a carb 350 by the last owner) and found that it was reading 69.5 ohms. When i measured the voltage on the pink wire coming from the dash it measured 5 volts. I thought the gas tanks operated on about 3 volts. If thats true how could i lower the current?
Thread
Thread Starter
Forum
Replies
Last Post
Ghettobird52
Tech / General Engine
15
12-29-2023 08:23 AM