Help wiring speedo
#1
Junior Member
Thread Starter
Join Date: Oct 2013
Location: Tacoma, WA
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 Camaro IROC-Z Z28
Engine: Custom Vortec 350
Transmission: 700R4
Axle/Gears: 3.73, Auburn Pro Series diff
Help wiring speedo
I have a 1987 Camaro 305 TPI that I did a carb swap on. We removed the ECM and ECM wiring.
I need help on how to wire up my Speedo.
Thanks
I need help on how to wire up my Speedo.
Thanks
#2
Supreme Member
iTrader: (167)
Re: Help wiring speedo
Your 87 Camaro speedo is controlled by a cable, not the ECM.
If the speedo isn't working after an engine swap,..... to look under the car to be sure the speedo cable is properly connected at the tranny tailshaft.
If it IS connected,..... find the cable under the dash housing and be sure it's pulled into the cluster properly.
If both ends of the cable are connected correctly and the Speedometer is still not working right than the Speedometer itself, Speedo cable, or Speedo Gears ( inside tranny ) are causing the problem.
If the speedo isn't working after an engine swap,..... to look under the car to be sure the speedo cable is properly connected at the tranny tailshaft.
If it IS connected,..... find the cable under the dash housing and be sure it's pulled into the cluster properly.
If both ends of the cable are connected correctly and the Speedometer is still not working right than the Speedometer itself, Speedo cable, or Speedo Gears ( inside tranny ) are causing the problem.
Thread
Thread Starter
Forum
Replies
Last Post
IROCZDAVE (88-L98)
Interior Parts for Sale
0
08-24-2015 06:54 AM
beachrodder
Transmissions and Drivetrain
3
08-07-2015 04:27 PM