SOMEONE HELP I DONT HAVE BREAK LIGHTS!!!
#1
Member
Thread Starter
Join Date: May 2012
Location: indianapolis
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 trans am
Engine: 355 vortec built 4 bolt main
Transmission: 700r4 w/ shift kit b&m console mega
Axle/Gears: 3.08
SOMEONE HELP I DONT HAVE BREAK LIGHTS!!!
Okay so on my 1985 trans am I had a brake light go out. One week later they all stop working. My hazardous lights work and turn signals works. But when I press the break pedal they don't come on at all. I replaced my break switch, replaced all double and single filament bulbs correctly, & checked/replaced all fuzes!!! I don't know where to go now. This is a stumpier!!!!
#2
Member
Thread Starter
Join Date: May 2012
Location: indianapolis
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 trans am
Engine: 355 vortec built 4 bolt main
Transmission: 700r4 w/ shift kit b&m console mega
Axle/Gears: 3.08
Re: SOMEONE HELP I DONT HAVE BREAK LIGHTS!!!
Okay so on my 1985 trans am I had a brake light go out. One week later they all stop working. My hazardous lights work and turn signals works. But when I press the break pedal they don't come on at all. I replaced my break switch, replaced all double and single filament bulbs correctly, & checked/replaced all fuzes!!! I don't know where to go now. This is a stumpier!!!!
#3
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,117
Received 1,688 Likes
on
1,283 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: SOMEONE HELP I DONT HAVE BREAK LIGHTS!!!
Got power on both sides of the brake light switch when you press the pedal?
If you do, it's probably the turn signal switch in the column, right below the steering wheel.
If you do, it's probably the turn signal switch in the column, right below the steering wheel.
#4
Member
Thread Starter
Join Date: May 2012
Location: indianapolis
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 trans am
Engine: 355 vortec built 4 bolt main
Transmission: 700r4 w/ shift kit b&m console mega
Axle/Gears: 3.08
#5
Member
Thread Starter
Join Date: May 2012
Location: indianapolis
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1985 trans am
Engine: 355 vortec built 4 bolt main
Transmission: 700r4 w/ shift kit b&m console mega
Axle/Gears: 3.08
Re: SOMEONE HELP I DONT HAVE BREAK LIGHTS!!!
All bulbs have been changed and are perfect! All fuzes appear to be perfect! All turnsignals work beautifully! Hazardous lights work fine! But no break lights period!
#7
Junior Member
Join Date: Feb 2013
Location: South Carolina
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 Iroc
Engine: 383
Transmission: 700
Axle/Gears: 4.11
Re: SOMEONE HELP I DONT HAVE BREAK LIGHTS!!!
Is the switch behind the brake pedal engaging fully? Sometimes they need a little adjustment.
Trending Topics
#8
Junior Member
iTrader: (1)
Join Date: May 2012
Location: Triad, NC
Posts: 62
Likes: 0
Received 0 Likes
on
0 Posts
Car: 89 RS
Engine: Stock L03
Transmission: Stock T5
Axle/Gears: Stock, Too high
Re: SOMEONE HELP I DONT HAVE BREAK LIGHTS!!!
Get a testlight, changing parts without knowing where you have power is pointless.
Do you have power going into the brakelight switch? Do you have power coming out of the brakelight switch?
On vehicles that have bulbs performing multiple functions stop/turn/tail, as I believe T/As do, the power for stop and turn both will go thru the turn signal switch, just because one function of the switch works does not mean all do. If your turns and hazards work you may assume the chassis wiring is not the culprit.
Thread
Thread Starter
Forum
Replies
Last Post