running 12v to msd distributor
#1
Junior Member
Thread Starter
Join Date: Mar 2012
Location: Las Vegas
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Camaro Lt
Engine: 350
Transmission: 700R4
Axle/Gears: 4th gen 3:42, posi, disc
running 12v to msd distributor
I just bought a streetfire dizzy. There is a connection labeled Batt. The instructions say I need to run 12V through at least a 14 gauge wire. Where would be the best place to pull power from? The white/pink wires from the old coil are 20gauge (so I read), so that option is out.
#4
Junior Member
Thread Starter
Join Date: Mar 2012
Location: Las Vegas
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
Car: 87 Camaro Lt
Engine: 350
Transmission: 700R4
Axle/Gears: 4th gen 3:42, posi, disc
Re: running 12v to msd distributor
I read it in another forum. What connection do I use? There are two connections that clip into the stock coil. Both of them have white and pink wires.
#5
Supreme Member
iTrader: (13)
Join Date: Apr 2005
Location: Not in Kansas anymore
Posts: 7,732
Likes: 0
Received 11 Likes
on
11 Posts
Car: 82 Z28
Engine: 383 SP EFI/ 4150 TB
Transmission: T400
Axle/Gears: QP 9" 3.73
Re: running 12v to msd distributor
One of the plugs on a dual connector coil goes to the harness (Ign switch ), the other to the dist.
Use the pink wire from the plug that goes to the harness
If you want your tacho to work use the white from that same plug to the new dist
Thread
Thread Starter
Forum
Replies
Last Post
9192camaro
Engine/Drivetrain/Suspension Parts for Sale
16
02-03-2019 12:21 AM