Electronics Need help wiring something up? Thinking of adding an electrical component to your car? Need help troubleshooting that wiring glitch?

P/S Power Door Lock Wont Lock

Thread Tools
 
Search this Thread
 
Old 10-17-2012, 09:18 PM
  #1  
Senior Member

Thread Starter
iTrader: (3)
 
insomniac's Avatar
 
Join Date: Jul 2010
Location: The Jersey Shore
Posts: 833
Received 17 Likes on 8 Posts
Car: 1991 Firebird Convertible
Engine: 5.7 L98
Transmission: 700R4
Axle/Gears: 3.45 9 Bolt Posi
P/S Power Door Lock Wont Lock

my passanger side power door lock does not lock from either switch. it unlocks fine, drivers side locks fine but the p/s only goes about half way soemtimes if im lucky and hit the button a few times i can get it to lock.


Switch or actuator?
Old 10-17-2012, 11:38 PM
  #2  
Supreme Member

iTrader: (3)
 
BigBadLou's Avatar
 
Join Date: Jul 2004
Posts: 2,989
Likes: 0
Received 5 Likes on 4 Posts
Car: '91 Z28 convertible
Engine: TPI
Transmission: T5
Axle/Gears: 3.27 posi disc
Re: P/S Power Door Lock Wont Lock

Neither.
It sounds like a typical dry and gummed up lock.
If you can hit the lock button multiple times and it eventually moves the rod all the way and locks the door, it just needs a good cleaning and lubing. Our cars suffer from this newly discovered disorder, they call it "age".
Remove the lock, clean it, lube it and it will work just like new.

Hope this helps.
Lou
Old 10-18-2012, 02:40 AM
  #3  
Supreme Member

iTrader: (8)
 
87CIZ's Avatar
 
Join Date: Apr 2002
Location: Ohio
Posts: 2,028
Received 1 Like on 1 Post
Car: 88' Iroc-Z
Engine: LQ9
Transmission: T-56
Axle/Gears: 3.42
Re: P/S Power Door Lock Wont Lock

Put the key in the door and manually lock/unlock it. If it is hard to turn then its probably hummed up. However if it turns freely you have a lazy lock. Behind the driver side kick panel, there are relays screwed to the metal of the car. The screw tends to loosen up making a weak ground. In turn the solenoids are weak also.

https://www.thirdgen.org/forums/body...ator-isnt.html
Old 10-18-2012, 03:03 PM
  #4  
Senior Member
iTrader: (1)
 
Buggy Disaster's Avatar
 
Join Date: Mar 2012
Location: Georgia
Posts: 574
Likes: 0
Received 6 Likes on 4 Posts
Car: 91' Z28. 70' Dune Buggy
Engine: LSX Cam/Full Bolt ons
Transmission: T56
Axle/Gears: 4.10
Re: P/S Power Door Lock Wont Lock

I had the same problem. I just sprayed some wd-40 into the side of the door aswell as into the window aiming for the actuator. Then I pressed the unlock/lock bottom. And repeated untill it worked like new.
Old 10-24-2012, 10:05 AM
  #5  
Member

iTrader: (1)
 
LilSki's Avatar
 
Join Date: Feb 2010
Posts: 467
Likes: 0
Received 3 Likes on 3 Posts
Car: 85 Trans Am
Engine: 98 Vortec 350 LT1 Cam w/ TPI
Transmission: T56
Axle/Gears: 9 bolt 3:27
Re: P/S Power Door Lock Wont Lock

The other thing it can be is how the lock actuator mounts to the door. In my case even with everything working freely it still didn't lock. I found there was a ton of slop in the rivets that held the actuator to the door. I drilled these out and installed bolts and nuts. Once the slop was gone everything worked perfectly.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BRoss99
Electronics
27
12-07-2020 06:50 PM
Vintageracer
Camaros for Sale
12
01-10-2020 05:33 PM
neekolzun
Body
32
08-24-2015 04:59 PM
Out-Cast
Interior Parts for Sale
2
08-23-2015 06:33 AM
stalkier
Electronics
1
08-21-2015 01:54 AM



Quick Reply: P/S Power Door Lock Wont Lock



All times are GMT -5. The time now is 06:39 PM.