need help putting hatch release switch back together
#1
Member
Thread Starter
Join Date: Oct 2011
Location: Northern Colorado
Posts: 185
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro RS - B4C option
Engine: L98 5.7l V8
Transmission: 4 speed auto
Axle/Gears: 3.23
need help putting hatch release switch back together
So when I was unplugging my hatch release switch, the whole thing came apart. I found all the pieces I think, but I'm having an issue putting it back together.
There were 3 springs, 2 small ones and one large one. The 2 smaller springs have tracks they fit in between the slider button and the plastic piece it snaps into. After that, you put in the top metal contact piece and the single long spring goes behind it somewhere I believe to put pressure on the plate, but I can't figure out how. Does anyone know? I can provide snapshots if my explanation is lacking.
Thanks
There were 3 springs, 2 small ones and one large one. The 2 smaller springs have tracks they fit in between the slider button and the plastic piece it snaps into. After that, you put in the top metal contact piece and the single long spring goes behind it somewhere I believe to put pressure on the plate, but I can't figure out how. Does anyone know? I can provide snapshots if my explanation is lacking.
Thanks
#2
Senior Member
iTrader: (3)
Re: need help putting hatch release switch back together
I made this thread a few weeks ago. I hope it helps you:
https://www.thirdgen.org/forums/inte...ing-power.html
https://www.thirdgen.org/forums/inte...ing-power.html
Thread
Thread Starter
Forum
Replies
Last Post
86IROC112
Engine/Drivetrain/Suspension Parts for Sale
4
08-17-2015 02:00 PM