HELP NO REVERSE LIGHTS!!!!
#1
Senior Member
Thread Starter
Join Date: Aug 2010
Location: Lincoln, NE
Posts: 680
Likes: 0
Received 1 Like
on
1 Post
Car: 86 Iroc-Z28
Engine: 5.3
Transmission: 4l60
HELP NO REVERSE LIGHTS!!!!
I have an 86 irocz reverse lights wont work but for a split second when i go to put it in reverse i thought maybe the bulbs were getting close to burning out so i replaced them same problem exist. Anybody know what to do?
#2
Supreme Member
Re: HELP NO REVERSE LIGHTS!!!!
Your neutral safety switch needs to be adjusted. It's attached to the side of the shift mechanism.
Last edited by paulo57509; 02-11-2012 at 01:57 AM.
#4
Supreme Member
Trending Topics
#9
Supreme Member
Re: HELP NO REVERSE LIGHTS!!!!
Loosen the two or three screws that fasten the switch to the shifter and rotate the switch fore/aft until the back-up lights stay on. Before you button it up, confirm that the engine cranks only in P and N and not in any other range.
#10
Senior Member
Thread Starter
Join Date: Aug 2010
Location: Lincoln, NE
Posts: 680
Likes: 0
Received 1 Like
on
1 Post
Car: 86 Iroc-Z28
Engine: 5.3
Transmission: 4l60
Re: HELP NO REVERSE LIGHTS!!!!
Heres what mine looks like. Im guessing your talking bout the silver part that attaches the plug to the the rest of the shifter assembly?
(The yellow wires and black and red are ran for switches so ignore those)
(The yellow wires and black and red are ran for switches so ignore those)
#12
Senior Member
Thread Starter
Join Date: Aug 2010
Location: Lincoln, NE
Posts: 680
Likes: 0
Received 1 Like
on
1 Post
Car: 86 Iroc-Z28
Engine: 5.3
Transmission: 4l60
Re: HELP NO REVERSE LIGHTS!!!!
And god said let there be light!!!! thanks paulo you saved me a huge headache and having to waste money taken it in to be looked at
Last edited by 86_irocz-28; 02-13-2012 at 03:06 AM.
#13
Member
iTrader: (1)
Join Date: Dec 2011
Location: under the hood of my car in Massachusetts
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 rs daily driver work in progress
Engine: 3.1 , 204/214 cam
Transmission: 700 r-4, b& m megashifter
Axle/Gears: I want a posi with rear discs
Re: HELP NO REVERSE LIGHTS!!!!
I got my camaro thru auto repairables. The driver's side took a hard hit replaced the ¼ and the door already. But the previous owner put in a B&M ratchet shifter. The reverse ( or back-up lights ) aren't working. I see a blue and a green wire that was clipped. Could one of these be wired to a switch?
I like the idea of it being hard to shift. If I ever get car-jacked, I'd just put it in park and lmao.
On another plus side, my wife can't drive it either.
I like the idea of it being hard to shift. If I ever get car-jacked, I'd just put it in park and lmao.
On another plus side, my wife can't drive it either.
#14
Supreme Member
Join Date: Jan 2006
Location: Mooresville NC
Posts: 3,341
Likes: 0
Received 10 Likes
on
10 Posts
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
Get Back !
Yes the blue and green wires are connected to the reverse light switch on the shifter.
Connect those to the blue and green wires which you should find under the console.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Slamming The Wall Is Not The Neatest Way To Remove An Engine
.
Connect those to the blue and green wires which you should find under the console.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Slamming The Wall Is Not The Neatest Way To Remove An Engine
.
#15
Member
Join Date: Jun 2009
Location: Summerville, SC
Posts: 113
Likes: 0
Received 4 Likes
on
3 Posts
Car: '91 RS, '64 C10 Stepside
Engine: 305 TBI, '00 5.3
Transmission: Manual, Automatic
Axle/Gears: 4th Gen with 3.42, 4.10
Re: HELP NO REVERSE LIGHTS!!!!
Is the same switch applicable for a '91 RS 5-speed? I'm having the same issue with intermitent/no reverse lights.
#16
Supreme Member
Re: HELP NO REVERSE LIGHTS!!!!
Perhaps someone else can confirm this for you.
#17
Supreme Member
iTrader: (1)
Join Date: Oct 2005
Location: Glen Park, NY
Posts: 1,050
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1987 IROC-Z
Engine: TPIS II Supercharged w/Nitrous
Transmission: 700R4 Probuilt
Axle/Gears: 3:73 Richmond 12 Bolt
Re: HELP NO REVERSE LIGHTS!!!!
I think that is correct, I am pretty sure it is in the tranmission
#18
Supreme Member
iTrader: (3)
Join Date: Jul 2004
Posts: 2,989
Likes: 0
Received 5 Likes
on
4 Posts
Car: '91 Z28 convertible
Engine: TPI
Transmission: T5
Axle/Gears: 3.27 posi disc
Re: HELP NO REVERSE LIGHTS!!!!
Yes, left/driver side of the transmission body has a two-prong plug, with a dark-blue wire and a light-green wire. The dark-blue wire should have power with key-on, the light-green wire sends the power when it is activated by the reverse gear in the transmission.
Hope this helps.
Lou
Hope this helps.
Lou
#19
Junior Member
iTrader: (1)
Join Date: Nov 2011
Location: Ft Lewis WA
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Car: 92 Camaro RS
Engine: 305 TBI
Transmission: T5
Re: HELP NO REVERSE LIGHTS!!!!
I have a 92 camaro t5 and when i shift into reverse the lights come on but when i release the clutch and start moving the lights flicker on and off at different intervals. Any help would be much appreciated
#20
Supreme Member
Join Date: Jan 2006
Location: Mooresville NC
Posts: 3,341
Likes: 0
Received 10 Likes
on
10 Posts
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
Get Back !
It sounds like the switch needs adjustment.
You can monitor the by connecting a 12volt ready LED across it and mounting it in the cockpit to prove or disprove the switch is the problem.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing !
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
We Keep The Air Wrench Shiny So It Looks Good When We Throw It Across The Pit Box
You can monitor the by connecting a 12volt ready LED across it and mounting it in the cockpit to prove or disprove the switch is the problem.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing !
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
We Keep The Air Wrench Shiny So It Looks Good When We Throw It Across The Pit Box
#21
Junior Member
Join Date: Oct 2013
Location: Anna, Tx
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1984 Trans Am
Engine: 305 H.O.
Transmission: 5 speed manual
Re: HELP NO REVERSE LIGHTS!!!!
im having the same issue on a 84 trans am wiith a T5, how could i fix it?
#22
Senior Member
iTrader: (1)
Re: HELP NO REVERSE LIGHTS!!!!
https://www.holley.com/products/driv...SABEgJe4vD_BwE you need this that mounts to the shifter and acouple screws
#23
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,115
Received 1,688 Likes
on
1,283 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: HELP NO REVERSE LIGHTS!!!!
The T-5 RLS is on the side of the transmission. Driver's side, rear of the case, right in front of where the extension housing bolts to it. Very eeeeeezy to replace. Might need tightening. Might just be the connector loose or something like that.
Thread
Thread Starter
Forum
Replies
Last Post
BlueIrocZ
Transmissions and Drivetrain
4
10-19-2011 01:56 PM