drivers signal ground
06-07-2010, 12:28 AM
#1
Member
Thread Starter
iTrader: (1)
Join Date: Dec 2002
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
drivers signal ground
does anyone know where the ground is for the drivers side signal light and is the fog lights grounded at the same spot? its been raining for days here and now the fog lights and the drivers side signal cut in and out and i can hear a clicking from under the dash, thinking that its a grounding problem.
06-07-2010, 12:33 PM
#2
Supreme Member
Join Date: Jan 2006
Location: Mooresville NC
Posts: 3,341
Likes: 0
Received 10 Likes
on
10 Posts
Car: LOWERED ♦ CRIMSON METALFLAKE
Engine: ► 400 KUBES ◄
Transmission: 765R4
Axle/Gears: EATON POSI 4.56
Left Alone In A Fog
If the all the left hazard lamps work the grounds are good.
Anyway the left front turn signal lamp ground is located behind the left headlights.
The left fog lamp ground is located behind the left headlights.
The right fog lamp ground is located behind the right headlights.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
If People Drove Any Slower They’d Be Going Backwards
.
Anyway the left front turn signal lamp ground is located behind the left headlights.
The left fog lamp ground is located behind the left headlights.
The right fog lamp ground is located behind the right headlights.
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
Happy Racing!
◙◙◙◙◙◙◙◙◙◙◙◙◙◙◙
If People Drove Any Slower They’d Be Going Backwards.
06-07-2010, 02:51 PM
#3
Junior Member
Join Date: Jan 2003
Location: Longmont, CO
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1988 IROC
Engine: 5.7
Transmission: 700R4
Axle/Gears: 2.77 posi
Re: drivers signal ground
It may also be the turn signal flasher, about 7-10 dollars at an auto parts store
06-07-2010, 02:59 PM
#4
Member
Thread Starter
iTrader: (1)
Join Date: Dec 2002
Posts: 136
Likes: 0
Received 0 Likes
on
0 Posts
Re: drivers signal ground
i though about the flasher also but figured what would it have to do with the fog lights also. i recently changed the bulbs in the front signals so i changed them again with new ones and put dielectric grease in then this time since i noticed alittle moisture around the bulb and so far no more problems. so i will see if that did it.
Thread
Thread Starter
Forum
Replies
Last Post