rpm limit
01-26-2002, 03:27 PM
#1
Member
Thread Starter
iTrader: (1)
Join Date: Jul 1999
Location: Chesterland, Oh
Posts: 182
Likes: 0
Received 3 Likes
on
3 Posts
Car: 92 Trans Am
Engine: 350 tpi
Transmission: 5 Speed
Axle/Gears: 3.42
rpm limit
I was trying to burn this chip without asking anymore questions, but I'm stuck. I can't get the idle BLMs to come down from 160. The rest of my fuel curve is pretty close. I was thinking it needs "battery correction?", but I can't find that heading in Winbin. Could it be named something else?
More importantly, in 2nd gear I can't rev over 5000rpm. It will go over 6000 in first. What are the fuel cutoff upper and lower limits and could this be a problem if they are set at 1250 and 950?
Everything else is running pretty good.
More importantly, in 2nd gear I can't rev over 5000rpm. It will go over 6000 in first. What are the fuel cutoff upper and lower limits and could this be a problem if they are set at 1250 and 950?
Everything else is running pretty good.
01-27-2002, 06:51 PM
#2
Member
Thread Starter
iTrader: (1)
Join Date: Jul 1999
Location: Chesterland, Oh
Posts: 182
Likes: 0
Received 3 Likes
on
3 Posts
Car: 92 Trans Am
Engine: 350 tpi
Transmission: 5 Speed
Axle/Gears: 3.42
I solved the rpm problem. It wasn't getting enough spark at WOT.
The high idle BLM is still there. Changing the battery correction didn't help. I'm thinking vacuum leak now.
The high idle BLM is still there. Changing the battery correction didn't help. I'm thinking vacuum leak now.
Thread
Thread Starter
Forum
Replies
Last Post
MikkoV
TPI
2
09-09-2015 04:25 PM
UltRoadWarrior9
Transmissions and Drivetrain
3
09-02-2015 08:24 PM