luca

i got a problem with tunerpro i downloaded and opened the $88 V6 xdf and ads files but the parameters are all messed up and don't make sense
for example injector flow rate 1.62 ,coolant fan on at -4c ,cylinder 142 , spark advance and everything else
somebody know what cause this?
thanks

Tuned Performance

iTrader: (92)

What bcc is being viewed ? Have you tried the newest version of tp ?

http://tunerpro.net/downloadApp.htm

luca

thanks for the response
Ive got the newest version tp
ive tried it with different bin and definitions but its all the same

Tuned Performance

iTrader: (92)

Cyl should be 192, you can upload your bin to see if the bcc looks right. Maybe you have bad bins.

http://www.gearhead-efi.com/bithoist/query.php

luca

what do you mean by bcc ? I got the autoprom apu1 tried to read the memcal but it doesnt work right
i tried v8 bins and definitions but its the same

Tuned Performance

iTrader: (92)

Broadcast code the 3-4 Letter identifier on the proms silver sticker. Offsets right in your read ? Mask show in the hex ?

luca

the memcal is a Arpl 5180 hex size is set to 8000 base offset is 0000

Tuned Performance

iTrader: (92)

ARPL was superseded to BAWX see if this data looks good its a 32k file size

luca

thanks a lot now this one works all other don´t
is there a way to eliminate the throttle hang between shifts on the manual transmission cars?
i think its called the throttle follower it is very annoying

luca

thanks a lot now this one works all other don´t
is there a way to eliminate the throttle hang between shifts on the manual transmission cars?
i think its called the throttle follower it is very annoying

Tuned Performance

iTrader: (92)

You definitely can play with throttle follower . Iirc it’s for stall control.

luca

there is no throttle folower folder in the $88 how can i change it ?