runing 2 bar map sensor on 1227747 ecm
#1
runing 2 bar map sensor on 1227747 ecm
using tuner pro to burn stock chips with great results
want to use 2 bar map sensor with gm 1227747 ecm for boost at later date want to get ecm timing and fuel dialed in before having to deal with boosted conditions
anyone using 1227747 ecm and 2 bar map sensor?
thanks Bill
want to use 2 bar map sensor with gm 1227747 ecm for boost at later date want to get ecm timing and fuel dialed in before having to deal with boosted conditions
anyone using 1227747 ecm and 2 bar map sensor?
thanks Bill
#2
Member
Join Date: Sep 2002
Location: honolulu
Posts: 182
Likes: 0
Received 10 Likes
on
10 Posts
Car: '86MCSS
Engine: 396 .030"
Transmission: M20
Re: runing 2 bar map sensor on 1227747 ecm
My thoughts...no one has really done it so better to start with a ECM that GM already ran it with boost. I'd look into the sy/ty stuff '749 or even a '7730 turbo sunbird.
#3
Moderator
iTrader: (2)
Re: runing 2 bar map sensor on 1227747 ecm
Not possible, at least not without rewriting the assembly code for the ECM.
Better off, as stated above, starting with an ECM and mask that supports boost already. The problem will be that there was no OEM TBI with boost combination from GM, that I'm aware of.
Better off, as stated above, starting with an ECM and mask that supports boost already. The problem will be that there was no OEM TBI with boost combination from GM, that I'm aware of.
#4
Re: runing 2 bar map sensor on 1227747 ecm
ebl might use tbi and a 2 bar option? but you're using a 747 ecm, so I'm guessing it's controlling a electronic shifted tranny? so you'd have to piggy back the 2 ecm's to keep the tranny controls?
#6
Thread
Thread Starter
Forum
Replies
Last Post