tunerpro issue
#1
Member
Thread Starter
Join Date: Jul 2006
Location: Surrey, BC
Posts: 157
Likes: 0
Received 1 Like
on
1 Post
Car: 1985 Camaro Z28
Engine: 355 SD TPI
Transmission: 5spd w/Hurst Short Throw
Axle/Gears: 4th Gen 3.42 LS1 Brakes
tunerpro issue
having problems data logging. With my car, no problems. I can data log and see data with no issues. I plug into a buddies car (actually a 38 dodge with a TPI) and the dashboard in tunerpro cycles between real time readings and max values. sometimes it cycles non-stop, other times 10-30 seconds between jumps in values.
any help would be awesome!
any help would be awesome!
#3
Member
Thread Starter
Join Date: Jul 2006
Location: Surrey, BC
Posts: 157
Likes: 0
Received 1 Like
on
1 Post
Car: 1985 Camaro Z28
Engine: 355 SD TPI
Transmission: 5spd w/Hurst Short Throw
Axle/Gears: 4th Gen 3.42 LS1 Brakes
Re: tunerpro issue
yes. i'm using the same files we used to edit and burn the prom.
#4
Member
Thread Starter
Join Date: Jul 2006
Location: Surrey, BC
Posts: 157
Likes: 0
Received 1 Like
on
1 Post
Car: 1985 Camaro Z28
Engine: 355 SD TPI
Transmission: 5spd w/Hurst Short Throw
Axle/Gears: 4th Gen 3.42 LS1 Brakes
Re: tunerpro issue
i should note, i've also swapped ECU's and chip adapters, made no difference.
#5
Member
iTrader: (1)
Join Date: Aug 2004
Location: NH
Posts: 194
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Z28
Engine: LQ9 W/ Howards ASA cam+Fast 90
Transmission: T56 Mgw shifter
Axle/Gears: Currie 9inch w 4.30 gears
Re: tunerpro issue
i have experienced this on tunerpro V5 and on mine it was not the entire dash, only certain values would do this , the only solution i found (for me ) was to download and use a different adx file , this solved the issue for me, hopefully for you too
#6
Supreme Member
iTrader: (1)
Join Date: Apr 2004
Location: Browns Town
Posts: 3,178
Likes: 0
Received 3 Likes
on
3 Posts
Car: 86 Monte SS (730,$8D,G3,AP,4K,S_V4)
Engine: 406 Hyd Roller 236/242
Transmission: 700R4 HomeBrew, 2.4K stall
Axle/Gears: 3:73 Posi, 7.5 Soon to break
Re: tunerpro issue
Add the delay (or make it longer) in the connect macro.
Otherwise some setups try to communicate before the last of the previous data has been read.
Here's how to do it
http://forum.tunerpro.net/viewtopic.php?t=2215
Jp
Otherwise some setups try to communicate before the last of the previous data has been read.
Here's how to do it
http://forum.tunerpro.net/viewtopic.php?t=2215
Jp
Last edited by JP86SS; 09-05-2012 at 07:01 PM. Reason: Added link:
Thread
Thread Starter
Forum
Replies
Last Post