knock sensor
#1
Junior Member
Thread Starter
Join Date: Sep 2002
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro
Engine: 383
Transmission: 700r4
knock sensor
I have tried everything but I can't get the computer to quit pulling timing out. I have added fuel in the chip I have taken timing out my self and it is not getting any better. the knock sensor is pulling 8-11 degrees out so i went and pulled 12 degrees out accross the board to see if that would help but it didn't do any thing for me. What do you guys suggest that i try next?
#2
Maybe look for where the false knock is coming from. If you've pulled out enough timing to remove the detonation, you need to look at where the noise is coming from- roller rockers? Exhaust banging on something, etc.
John
John
#4
Junior Member
Thread Starter
Join Date: Sep 2002
Posts: 93
Likes: 0
Received 0 Likes
on
0 Posts
Car: 91 Camaro
Engine: 383
Transmission: 700r4
honestly i havent had the time to mess with it much lately. I think it might be in my valvetrain I was going to try to adjust the rocker arms this weekend and see if that helps any.
Thread
Thread Starter
Forum
Replies
Last Post