Spend my money please
03-26-2019, 09:57 PM
#1
Senior Member
Thread Starter
Spend my money please
Tuning and computers make my head spin. This is what I have and or is about to go into my car. Some of my mods have been in boxes since 2013 and they are FINALLY going in.
Tell me which tuner, programmer, system or whatever that I'm going to need.
I have a 5.7L TPI, weiand stealth ram, comp cam, 1.6 rockers, dart iron eagle heads, msd ignition, and 3.73s. That's the bulk of the mods. No power adder, (sold the SC) my NOS system has never been installed and it's possible that I may never install it.
The cam, throttle body and intake are about to go on.
What exactly do I need to buy to have this thing tuned for the cam and intake?
Tell me which tuner, programmer, system or whatever that I'm going to need.
I have a 5.7L TPI, weiand stealth ram, comp cam, 1.6 rockers, dart iron eagle heads, msd ignition, and 3.73s. That's the bulk of the mods. No power adder, (sold the SC) my NOS system has never been installed and it's possible that I may never install it.
The cam, throttle body and intake are about to go on.
What exactly do I need to buy to have this thing tuned for the cam and intake?
03-27-2019, 07:11 AM
#3
Senior Member
Thread Starter
03-27-2019, 02:04 PM
#4
Re: Spend my money please
Well I would highly reccomend the EBL system from Dynamic EFI. The owner/developer of the system is a frequent contributor here and we have a lot of members including myself using it. You will nees the EBL Flash-II system with the port mod option:
https://www.dynamicefi.com/EBL_Flash.php
It takes about 30 minutes to install and setup. You will need a MAP sensor and harness plug to wire into the existing MAF harness.
GD
https://www.dynamicefi.com/EBL_Flash.php
It takes about 30 minutes to install and setup. You will need a MAP sensor and harness plug to wire into the existing MAF harness.
GD
Thread
Thread Starter
Forum
Replies
Last Post
ringo234
Auto Detailing and Appearance
49
01-04-2007 06:24 PM
ringo234
Southern California Area
6
12-31-2006 08:54 AM
Kingtal0n
Transmissions and Drivetrain
4
11-15-2002 06:26 PM