'90 F-body / Truck TBI ECM Compatibility
10-30-2001, 01:55 PM
#1
Supreme Member
Thread Starter
Join Date: Jul 1999
Location: Tucson, AZ, USA
Posts: 1,335
Likes: 0
Received 2 Likes
on
2 Posts
Car: '92 Z28; Dk Teal; Her Pkg
Engine: 305
Transmission: Richmond 6 Spd
Axle/Gears: Moser 9", Detroit Locker, 3.70
'90 F-body / Truck TBI ECM Compatibility
I am working on a '90 P/U truck with a 5.7L TBI (engine code K), and a 1227747 ECM. Could I use a 1228746 f-body ECM (it's actually out of a '90 5.7L police car, engine code 7) in the P/U truck, or are there significant differences in the ECMs & harnesses?
With the stock chips, the 8746 runs a bit better than the 7747 with a GM 10134334 cam (235 deg @ 0.050", 0.480" lift i/e) installed in the 5.7L, although I need to bump up the idle & fix the over rich condition @ idle in the PROM.
------------------
Tim
1992 Z28, 305 TPI 5 speed, 12.1 sec @ 114.7 mph
1984 Berlinetta 305 TPI Auto, 13.8 sec @ 99.7 mph
With the stock chips, the 8746 runs a bit better than the 7747 with a GM 10134334 cam (235 deg @ 0.050", 0.480" lift i/e) installed in the 5.7L, although I need to bump up the idle & fix the over rich condition @ idle in the PROM.
------------------
Tim
1992 Z28, 305 TPI 5 speed, 12.1 sec @ 114.7 mph
1984 Berlinetta 305 TPI Auto, 13.8 sec @ 99.7 mph
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
12-10-2019 07:07 PM
Billy Decker
Engine/Drivetrain/Suspension Wanted
0
09-04-2015 03:46 PM
