IAC.. Holley.. MOPAR!!
#1
TGO Supporter/Moderator
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,735
Likes: 0
Received 89 Likes
on
75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
IAC.. Holley.. MOPAR!!
I just realized the Holley Commander 950 throttle bodies (1,000 cfm 4bbl) use MOPAR Iac valves...
I've used 3 of these in combos over the years and always had trouble with idle.. Never thought to check if it was an actual GM IAC..
Apparently the pinouts are different..
Anyone know of a PWM iac that will use this mounting pattern? The Ford's all look huge.
-- Joe
I've used 3 of these in combos over the years and always had trouble with idle.. Never thought to check if it was an actual GM IAC..
Apparently the pinouts are different..
Anyone know of a PWM iac that will use this mounting pattern? The Ford's all look huge.
-- Joe
#2
Senior Member
Join Date: May 2010
Location: Alamogordo, NM
Posts: 848
Likes: 0
Received 0 Likes
on
0 Posts
Car: '86 Grand National
Engine: LZ9????
Transmission: 2004R
Axle/Gears: 3.42
Re: IAC.. Holley.. MOPAR!!
I just realized the Holley Commander 950 throttle bodies (1,000 cfm 4bbl) use MOPAR Iac valves...
I've used 3 of these in combos over the years and always had trouble with idle.. Never thought to check if it was an actual GM IAC..
Apparently the pinouts are different..
Anyone know of a PWM iac that will use this mounting pattern? The Ford's all look huge.
-- Joe
I've used 3 of these in combos over the years and always had trouble with idle.. Never thought to check if it was an actual GM IAC..
Apparently the pinouts are different..
Anyone know of a PWM iac that will use this mounting pattern? The Ford's all look huge.
-- Joe
#3
TGO Supporter/Moderator
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,735
Likes: 0
Received 89 Likes
on
75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
Re: IAC.. Holley.. MOPAR!!
I noticed some fords have a two piece, so the iac actually bolts to the housing which in turn bolts to the intake.
-- Joe
#4
Supreme Member
Join Date: Oct 2002
Location: Idaho
Posts: 1,096
Likes: 0
Received 0 Likes
on
0 Posts
Re: IAC.. Holley.. MOPAR!!
That looks identical to Holley 4 barrel TBI units and stock Chevy BB IAC...
http://www.rockauto.com/catalog/moreinfo.php?pk=88845
http://www.rockauto.com/catalog/moreinfo.php?pk=88845
#5
TGO Supporter/Moderator
Thread Starter
iTrader: (12)
Join Date: Jul 1999
Location: SALEM, NH
Posts: 11,735
Likes: 0
Received 89 Likes
on
75 Posts
Car: '88 Formula, '94 Corvette, '95 Bird
Engine: LC9, 355" LT1, LT1
Transmission: T5, Zf6, 4L60E
Axle/Gears: 3.42, Dana44 3.45, 3.23
Re: IAC.. Holley.. MOPAR!!
That looks identical to Holley 4 barrel TBI units and stock Chevy BB IAC...
http://www.rockauto.com/catalog/moreinfo.php?pk=88845
http://www.rockauto.com/catalog/moreinfo.php?pk=88845
http://www.megamanual.com/ms2/ewIAC.gif
-- Joe
Last edited by anesthes; 08-22-2012 at 01:11 PM. Reason: wrong link
Trending Topics
#8
Re: IAC.. Holley.. MOPAR!!
#10
Member
iTrader: (18)
Join Date: Nov 2005
Location: New Hampshire
Posts: 342
Likes: 0
Received 0 Likes
on
0 Posts
Car: 86 MCSS-87 Z28
Transmission: Auto OD-5spd
Axle/Gears: 3.73 both cars
Re: IAC.. Holley.. MOPAR!!
The Holley body IAC's are 4 pins in a row ---- GM is square _ _
_ _
The Holley ones are Standard Motor Parts # AC416 around $55 dollars (2000 Dodge Ram 1500 if I remember) The Standard Part# is correct for sure tho.
_ _
The Holley ones are Standard Motor Parts # AC416 around $55 dollars (2000 Dodge Ram 1500 if I remember) The Standard Part# is correct for sure tho.
Thread
Thread Starter
Forum
Replies
Last Post
Street Lethal
Miscellaneous Third Gen Items!
0
09-07-2015 01:09 PM