Timmie

Ok, I finally got my usb to obd1 connector
I got tunerpro RT
I got the 90 -92 camaro/firebird V6.ads file
and i cant get any data read.

tunerpro sees my cable, but 1 moment it sees the cable on com3 and the it finds it back on com5.
also on my usb cable there is a strap I can switch between 4 pins.


does anybody here how I have to connect the pins

Timmie

got it to work. to bad my car backfired on me 10 minutes later.

RBob

iTrader: (1)

Good to hear you have it working. One item is that vehcile doesn't need a 10K across A & B on the ALDL connector. So if the cable you are using has one it is best to remove it.

Having a 10K resistor will change the way the ECM runs the vehicle. And isn't required for data logging that particular ECM/Mask.

RBob.

KBcobra

sry to highjack but where do you get the cable?

Timmie

looks like my vehicle needs to 10k resistor so the ast 1 is the right on.
got the cable from here.
http://www.aldlcable.com/