cold case fan connector
#1
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Tucson, AZ
Posts: 66
Likes: 0
Received 6 Likes
on
4 Posts
Car: 84 Z-28 Camaro, 2022 Chevy 2500
Engine: 383
Transmission: T-56
Axle/Gears: 3.73
cold case fan connector
I recently purchased a cold case radiator with 2X 12" fans, and I don't recognize the connectors they used, dose anyone know which connector they used and where I can get them? its a socket style connector with 1 connector turned 90* to the other
#4
Supreme Member
iTrader: (1)
Join Date: Sep 2005
Posts: 26,161
Received 1,697 Likes
on
1,290 Posts
Car: Yes
Engine: Usually
Transmission: Sometimes
Axle/Gears: Behind me somewhere
Re: cold case fan connector
I don't recognize it. Thought I might but...
Vorteciroc might. I couldn't say.
Can't believe Cold Case doesn't supply the mating connector; that's kinda weird. Have you contacted them?
If I couldn't get its mate I'd probably just do away with it and replace it with an Aptiv Metri-pack 480 series or thereabouts. You can get all the parts & pieces at Mouser easily enough.
Vorteciroc might. I couldn't say.
Can't believe Cold Case doesn't supply the mating connector; that's kinda weird. Have you contacted them?
If I couldn't get its mate I'd probably just do away with it and replace it with an Aptiv Metri-pack 480 series or thereabouts. You can get all the parts & pieces at Mouser easily enough.
#5
Supporter/Moderator
iTrader: (7)
Join Date: Feb 2001
Location: Cincinnati, OH
Posts: 13,260
Likes: 0
Received 394 Likes
on
300 Posts
Car: '90 RS
Engine: 377 LSX
Transmission: Magnum T56
Re: cold case fan connector
That's a pretty common style connector found on Spal fans as well. They sell various wiring and relay kits as well as a jumper kit that would connect to what you have pictured. Or, cut it off and put your own preferred connector on.
https://www.summitracing.com/parts/s...4aAlErEALw_wcB
https://www.summitracing.com/parts/s...4aAlErEALw_wcB
#6
Junior Member
Thread Starter
Join Date: Apr 2008
Location: Tucson, AZ
Posts: 66
Likes: 0
Received 6 Likes
on
4 Posts
Car: 84 Z-28 Camaro, 2022 Chevy 2500
Engine: 383
Transmission: T-56
Axle/Gears: 3.73
Re: cold case fan connector
sweet, thanks, I also got pro-flo 4 EFI from edelbrock and it has dual fan controllers built into it so I was going it wire them into the EFI....now I need to re-read the manual to see if the relays are wired in already or I need to get some lol...parts slowly coming togeather
Thread
Thread Starter
Forum
Replies
Last Post