Aluminum radiator and fan/shroud combo recommendations
07-26-2020, 11:49 AM
#1
Senior Member
Thread Starter
Join Date: Oct 2006
Location: California
Posts: 827
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 Chevy Camaro RS
Engine: L30 TBI 5.0L Vortec
Transmission: 700R4
Axle/Gears: Stock
Aluminum radiator and fan/shroud combo recommendations
Anyone have any fan/rad combos they have ran? I have been in the market to replace my stock plastic radiator and taurus fan with an aluminum one and shroud combo.
07-27-2020, 10:13 AM
#2
Member
Join Date: Sep 2002
Location: Duluth, Ga
Posts: 330
Likes: 0
Received 1 Like
on
1 Post
Car: 91 RS
Engine: 305 TPI
Transmission: T56
Axle/Gears: Auburn Pro / 3.42
Re: Aluminum radiator and fan/shroud combo recommendations
The 4th gen fans fit with little trimming and you can find them used. I picked up a set of 98-2002 fans for about $40 from a pull a part. Fit well with a little trimming. You will need to add a second fan circuit.
07-27-2020, 11:34 AM
#3
Re: Aluminum radiator and fan/shroud combo recommendations
There's a bunch of them at Summit. Should drop right in.
I would probably go for this one if I was going to replace everything:
https://www.summitracing.com/parts/r...t/model/camaro
I would probably go for this one if I was going to replace everything:
https://www.summitracing.com/parts/r...t/model/camaro
08-10-2020, 03:49 PM
#4
Re: Aluminum radiator and fan/shroud combo recommendations
Maybe it's just my but I've never had an aftermarket fan last as long as an OEM fan. I've tried Spal and Flex-a-lite. I've never had cooling issues with the stock 2 row, even with my last 406. I did change out fans to 4th gen OEM LS fans.
Thread
Thread Starter
Forum
Replies
Last Post
QuickStyle
Engine/Drivetrain/Suspension Parts for Sale
15
10-03-2008 02:53 PM