AC Removal
#1
Member
Thread Starter
Join Date: May 2013
Location: Tacoma, WA
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: 5.0 L03
Transmission: T-5
Axle/Gears: 3.43 Torsen 10 bolt
AC Removal
So the previous owner went about removing the AC, and I am not fully sure on what else is left to be removed. Take a look at the attached pic and tell me what you think?
#2
Supreme Member
Join Date: Apr 2010
Location: Modesto, California
Posts: 1,015
Likes: 0
Received 5 Likes
on
4 Posts
Car: 88 Firebird Formula
Engine: LO5 5.7 TBI/Ebl Flash
Transmission: 700R4
Axle/Gears: 2.73 stock rear end
Re: AC Removal
Need a farther back pic, but so far it looks like he disconnected lines to the ac pulley unit, and to the canister.
#3
Member
Thread Starter
Join Date: May 2013
Location: Tacoma, WA
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Camaro RS
Engine: 5.0 L03
Transmission: T-5
Axle/Gears: 3.43 Torsen 10 bolt
Re: AC Removal
I am just curious if there is a way to clean up this mess.. the lines are dislodging my valve cover breather and its getting nice and oily on my manifolds.
#4
Supreme Member
iTrader: (56)
Re: AC Removal
you can remove the big black plastic thing on the firewall.
and replace it with just a heater box and blower motor.
dont pay more then $60 for a heater box everybody wants $100 for the damn things....lol.hell i only pay $8 for them at the parts yard.. sold lots of them..
anyway.. it will take about 45 min for you to remove the big ugly box.
and replace it.. if you have never done one..if ya cant get the motore with the heater box.. you can cut your plastic fan down by 1"inch and it will work just fine.. easy easy
#5
Supreme Member
Join Date: Apr 2010
Location: Modesto, California
Posts: 1,015
Likes: 0
Received 5 Likes
on
4 Posts
Car: 88 Firebird Formula
Engine: LO5 5.7 TBI/Ebl Flash
Transmission: 700R4
Axle/Gears: 2.73 stock rear end
Re: AC Removal
are you going to reinstall the A/C.? if not.
you can remove the big black plastic thing on the firewall.
and replace it with just a heater box and blower motor.
dont pay more then $60 for a heater box everybody wants $100 for the damn things....lol.hell i only pay $8 for them at the parts yard.. sold lots of them..
anyway.. it will take about 45 min for you to remove the big ugly box.
and replace it.. if you have never done one..if ya cant get the motore with the heater box.. you can cut your plastic fan down by 1"inch and it will work just fine.. easy easy
you can remove the big black plastic thing on the firewall.
and replace it with just a heater box and blower motor.
dont pay more then $60 for a heater box everybody wants $100 for the damn things....lol.hell i only pay $8 for them at the parts yard.. sold lots of them..
anyway.. it will take about 45 min for you to remove the big ugly box.
and replace it.. if you have never done one..if ya cant get the motore with the heater box.. you can cut your plastic fan down by 1"inch and it will work just fine.. easy easy
I know right!!!!!!!!! People are crazy! I got lucky and went to the local junk yard this weekend to grab some bolts for my hawks new Air Dam. I knew i wanted to grab a non ac box for my upcoming header swap and luckily enough there was one there with one!!! I paid $17.42 out the door
#6
Supreme Member
iTrader: (56)
Re: AC Removal
Yeah its more annoying then hard i just did this last night! Funnest part was wiggling around the wiring harness lol.
I know right!!!!!!!!! People are crazy! I got lucky and went to the local junk yard this weekend to grab some bolts for my hawks new Air Dam. I knew i wanted to grab a non ac box for my upcoming header swap and luckily enough there was one there with one!!! I paid $17.42 out the door
I know right!!!!!!!!! People are crazy! I got lucky and went to the local junk yard this weekend to grab some bolts for my hawks new Air Dam. I knew i wanted to grab a non ac box for my upcoming header swap and luckily enough there was one there with one!!! I paid $17.42 out the door
the last time i went to get one for a buddy. there was a guy fighting to get that 10mm stud nut off..i was like well that one was going byby.. i looked at another camaro.. and it was gone...looked inside there it was sitting on the back seat...looked brand new.. picked it up and walked by the guy still fighting with his... where did ya get that one.he asked..sitting on the back seat of the camaro over there...
Thread
Thread Starter
Forum
Replies
Last Post