Question about fan shroud..
#1
Senior Member
Thread Starter
Join Date: Oct 2006
Location: California
Posts: 827
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 Chevy Camaro RS
Engine: L30 TBI 5.0L Vortec
Transmission: 700R4
Axle/Gears: Stock
Question about fan shroud..
Ok so heres the deal I have a perma-cool 16 inch fan on my radiator right now...She is still overheating with the ac on...my question is will the listed fan shroud below fit the listed direct fit stock radiator?
http://store.summitracing.com/partde...5&autoview=sku
http://store.summitracing.com/partde...4294840138+510
http://store.summitracing.com/partde...5&autoview=sku
http://store.summitracing.com/partde...4294840138+510
#4
Senior Member
Join Date: Nov 2005
Location: Michigan
Posts: 670
Likes: 0
Received 1 Like
on
1 Post
Car: 1984 Camaro Berlinetta
Engine: 355
Transmission: Th-350
Axle/Gears: 3.23
Re: Question about fan shroud..
not unless your proficient at welding aluminum or have access to a shop with sheet metal sheers, sheet metal brake(bender), and riveting tools or tig welder.
But then of course you could just fab yourself up one like i did.
I wish i could fab one for you, but i don't really have access to that stuff anymore. try finding a shop such as a welding shop and see if they can help you out, you need to measure your rad. core height,width and how deep you want the shroud to be(i suggest 1.5 to 2").
But then of course you could just fab yourself up one like i did.
I wish i could fab one for you, but i don't really have access to that stuff anymore. try finding a shop such as a welding shop and see if they can help you out, you need to measure your rad. core height,width and how deep you want the shroud to be(i suggest 1.5 to 2").
Last edited by stroker_SS; 06-02-2008 at 07:09 PM.
#5
Senior Member
Thread Starter
Join Date: Oct 2006
Location: California
Posts: 827
Likes: 0
Received 1 Like
on
1 Post
Car: 1989 Chevy Camaro RS
Engine: L30 TBI 5.0L Vortec
Transmission: 700R4
Axle/Gears: Stock
Re: Question about fan shroud..
not unless your proficient at welding aluminum or have access to a shop with sheet metal sheers, sheet metal brake(bender), and riveting tools or tig welder.
But then of course you could just fab yourself up one like i did.
I wish i could fab one for you, but i don't really have access to that stuff anymore. try finding a shop such as a welding shop and see if they can help you out, you need to measure your rad. core height,width and how deep you want the shroud to be(i suggest 1.5 to 2").
But then of course you could just fab yourself up one like i did.
I wish i could fab one for you, but i don't really have access to that stuff anymore. try finding a shop such as a welding shop and see if they can help you out, you need to measure your rad. core height,width and how deep you want the shroud to be(i suggest 1.5 to 2").
#6
Supreme Member
Join Date: Oct 2001
Location: Louisville, Ky
Posts: 3,155
Likes: 0
Received 2 Likes
on
2 Posts
Car: 1991 Z28
Engine: 383
Transmission: T-5
Axle/Gears: 3.08 10 Bolt
Re: Question about fan shroud..
Nice job! I love seeing people come up with good solutions to simple issues. I'm also having a overheating issue. Do you happen to know what year Taurus it was? SHO by chance?
#7
Supreme Member
Re: Question about fan shroud..
probably was from a 1991-95 3,8L taurus,'89 up SHO is
the same or nearly the same,this is a pretty good fan-
two speed motor,so must be connected properly or the
motor will burn out
the same or nearly the same,this is a pretty good fan-
two speed motor,so must be connected properly or the
motor will burn out
Trending Topics
#9
Supreme Member
iTrader: (5)
Join Date: Jan 2009
Location: league city
Posts: 2,928
Likes: 0
Received 3 Likes
on
3 Posts
Car: SOLD!!!!!
Re: Question about fan shroud..
there are several companies that make controllers for the two speed fans. look up lightning trucks or mustangs for there controllers. or you can run two of the single relays set ups to control both speeds.
Last edited by one92rs; 09-27-2009 at 08:35 AM.
Thread
Thread Starter
Forum
Replies
Last Post