Carburetors Carb discussion and questions. Upgrading your Third Gen's carburetor, swapping TBI to carburetor, or TPI to carburetor? Need LG4 or H.O. info? Post it here.

Sean Murphy Induction

Thread Tools
 
Search this Thread
 
Old 07-25-2020, 12:30 PM
  #1  
Supreme Member

Thread Starter
iTrader: (2)
 
MY87LT's Avatar
 
Join Date: Jun 2006
Location: Southern California
Posts: 1,685
Received 16 Likes on 12 Posts
Car: 1987 Camaro LT
Engine: LG4 w/ SLP headers & a 3" catback
Transmission: THM700R4 (Stock)
Axle/Gears: Stock 2.73 gears. No Posi
Sean Murphy Induction

I installed my freshly rebuilt E4ME Quadrajet on my Camaro LT yesterday. As soon as the fuel bowl filled with gas, the car fired right up. The check engine light never came back on as it had been doing this for years. The last time my car ran this great was when I first got it in the early 90's. The only thing I had to do was adjust the idle screw which was easy.

Sean Murphy is the go to man for rebuilds in my opinion. He is honest, straight to the point, and an expert in his field. As he is busy with quality rebuilds, I did have to be patient and waited over 6 weeks to get my carburetor back. You need to plan ahead if this is your daily driver which for me, it was not. I got the Stage 2 rebuild (details on his website). I am local so I was able to drop it off and pick at his shop. Otherwise, it's ship it to him and he will ship back.

Prior to the rebuild, Sean does ask for you to provide complete details of the car on which the carb is going to be installed on. That way, it will be properly tuned to run for its application. Like for me, I have the stock factory cam, but a performance exhaust along with larger wheels and tires.

All in all, I highly recommend Sean Murphy Induction. I considered for a minute that bolt on fuel injection kit for carbureted cars, but after this experience with my rebuild, that expensive idea went out the door.

Sean Murphy Induction, Inc.
17671 Metzler Lane unit A-7
Huntington Beach, CA 92647
Phone: 714-843-9169


https://www.smicarburetor.com
The following users liked this post:
gt4373 (07-25-2020)
Old 07-25-2020, 10:20 PM
  #2  
Member

 
nhgator's Avatar
 
Join Date: Jun 2012
Location: Concord N.H.
Posts: 375
Received 24 Likes on 15 Posts
Car: 1985 T/A
Re: Sean Murphy Induction

I replaced my electronic Quadrajet with a non-electronic from SMI,pretty much set the curb idle and adjusted the choke a little and haven't touched it since.
Old 07-28-2020, 11:40 AM
  #3  
Supreme Member

Thread Starter
iTrader: (2)
 
MY87LT's Avatar
 
Join Date: Jun 2006
Location: Southern California
Posts: 1,685
Received 16 Likes on 12 Posts
Car: 1987 Camaro LT
Engine: LG4 w/ SLP headers & a 3" catback
Transmission: THM700R4 (Stock)
Axle/Gears: Stock 2.73 gears. No Posi
Re: Sean Murphy Induction

Took my car out on Sunday for a good shakedown after the carb installation. It ran far better than my expectations. A Honda Civic did try to race me. I didn't bother.


Old 08-02-2020, 11:28 AM
  #4  
Supreme Member

 
BadSS's Avatar
 
Join Date: Sep 2000
Location: USA
Posts: 1,388
Received 78 Likes on 64 Posts
Re: Sean Murphy Induction

He's still one of the few that can make a CC quad work on modified engines. I learned the hard way that if the CCC is working correctly and the carb is tuned appropriately, there's little to know difference swapping out to a 750 vacuum and mechanical distributor on anything making less than 500HP. I spent about $500 dollars swapping out the CCC and gained nothing except a lighter wallet.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Dabesiv
Carburetors
5
06-21-2016 08:20 AM
calgutie
Carburetors
4
10-06-2012 06:48 PM
Briansz28
Carburetors
6
07-11-2003 09:14 PM
icebird_1981
Carburetors
2
02-02-2003 12:17 PM
tennysonmr
Carburetors
2
10-21-2001 09:46 AM



Quick Reply: Sean Murphy Induction



All times are GMT -5. The time now is 11:10 PM.