2 quick questions
#1
Senior Member
Thread Starter
Join Date: Jul 2007
Location: Manteca, Ca
Posts: 582
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983, 1986, 2001 Trans Am
Engine: 305 cfi, 350 carb, LS1
Transmission: 700,Edge 2800 th350,Edge 3400 4L60E
Axle/Gears: 9 Bolt 3.27 Borg-Warner, built 3.73
2 quick questions
Probably answered a 1,000 times jus need a few answers fast my 86 bird originally came with a 305 tpi and I am in the process of doing a 350 carb swap the 350 was out of a 94 Silverado and TBI. Soooooooo pretty much my question I'm swapping fro. Vbelt to serp and the original alt uses 2 wires and the new alt only uses 1 jus wondering wat to do there. 1 wire goes to the starter the other I haven't traced jus wondering wat to do there.
#2
Supreme Member
iTrader: (4)
Re: 2 quick questions
Probably answered a 1,000 times jus need a few answers fast my 86 bird originally came with a 305 tpi and I am in the process of doing a 350 carb swap the 350 was out of a 94 Silverado and TBI. Soooooooo pretty much my question I'm swapping fro. Vbelt to serp and the original alt uses 2 wires and the new alt only uses 1 jus wondering wat to do there. 1 wire goes to the starter the other I haven't traced jus wondering wat to do there.
#3
Senior Member
Thread Starter
Join Date: Jul 2007
Location: Manteca, Ca
Posts: 582
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983, 1986, 2001 Trans Am
Engine: 305 cfi, 350 carb, LS1
Transmission: 700,Edge 2800 th350,Edge 3400 4L60E
Axle/Gears: 9 Bolt 3.27 Borg-Warner, built 3.73
Re: 2 quick questions
Ive had a few people tell me there is a pigtail for the conversion if anyone has that part number would appreciate it....
#5
Senior Member
Thread Starter
Join Date: Jul 2007
Location: Manteca, Ca
Posts: 582
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983, 1986, 2001 Trans Am
Engine: 305 cfi, 350 carb, LS1
Transmission: 700,Edge 2800 th350,Edge 3400 4L60E
Axle/Gears: 9 Bolt 3.27 Borg-Warner, built 3.73
Re: 2 quick questions
Thanks a lot man I appreciate it my schedule right now is really tight so I barely have time to get on and respond here. I've done a couple searches and only found 1 site that carries it but was hoping that kragen has it if not I might see if Brian tunedperformance can make me one.
#6
Senior Member
Thread Starter
Join Date: Jul 2007
Location: Manteca, Ca
Posts: 582
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983, 1986, 2001 Trans Am
Engine: 305 cfi, 350 carb, LS1
Transmission: 700,Edge 2800 th350,Edge 3400 4L60E
Axle/Gears: 9 Bolt 3.27 Borg-Warner, built 3.73
Re: 2 quick questions
I have 1 more question when I pulled out the 165 harness it took out my oil pressure wire to the gauge and was wondering how that would be set up.
#7
Senior Member
Thread Starter
Join Date: Jul 2007
Location: Manteca, Ca
Posts: 582
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983, 1986, 2001 Trans Am
Engine: 305 cfi, 350 carb, LS1
Transmission: 700,Edge 2800 th350,Edge 3400 4L60E
Axle/Gears: 9 Bolt 3.27 Borg-Warner, built 3.73
Re: 2 quick questions
[IMG][/IMG] Right before I left work is wat the motor looks like I'm a complete newb to carbs been dealing with this tpi and ls since I was 17. Pretty much jus a 350 TBI motor out of a 94 Silverado 4x4 converted to carb. 2101performer with a 600cfm summit carb goin to run the stock pump with the Mallory regulator jus need the fittings and where I wanna mount it. Should be good to go next week I'm hoping. If anyone has any pointers or suggestions I'm all ears.
Last edited by 86firebirdta; 11-05-2014 at 01:57 PM.
Trending Topics
#8
Senior Member
Thread Starter
Join Date: Jul 2007
Location: Manteca, Ca
Posts: 582
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1983, 1986, 2001 Trans Am
Engine: 305 cfi, 350 carb, LS1
Transmission: 700,Edge 2800 th350,Edge 3400 4L60E
Axle/Gears: 9 Bolt 3.27 Borg-Warner, built 3.73
Re: 2 quick questions
Got the alt pigtail thanks for your help on that. If anyone can help me with the oil pressure gauge would appreciate that too.
Thread
Thread Starter
Forum
Replies
Last Post