Advice on UQ7 Performance Sound system
#1
Member
Thread Starter
Advice on UQ7 Performance Sound system
I had my ut4 rebuilt. My gain switch lights up when pressed. Steering wheel controls work. I have the oem speaker boxes with 5 inch sub just not in. No amp though. (Currently has 6x9s) How can I wire an aftermarket amp to the gain control and the head unit? switch on the dash? Also looking at after market subs in back hatch. What would be easier?
Last edited by 88BLKTransAmGTA; 07-08-2023 at 09:21 AM.
#2
Member
Thread Starter
Re: Advice on UQ7 Performance Sound system
I wanted to share the subwoofers I ended up finding that fit in the boxes. Couldn't find anything to fit the original mounting holes. The holes of these boxes were 4"
I went with the Dayton 4 1/2 Cf120s carbon fiber
-Overall Outside Diameter 4-7/8"
Overall Depth 2-5/16"
Baffle Cutout Diameter 4" Mounting Hole Diameter
Power Handling (RMS) 30 watts
Power Handling (max) 60 watts Continuous Program Power -- Impedance 4 ohms
Sensitivity 89.1 dB 2.83V/1m
Frequency Response 50 - 15 000 Hz Voice Coil
I went with the Dayton 4 1/2 Cf120s carbon fiber
-Overall Outside Diameter 4-7/8"
Overall Depth 2-5/16"
Baffle Cutout Diameter 4" Mounting Hole Diameter
Power Handling (RMS) 30 watts
Power Handling (max) 60 watts Continuous Program Power -- Impedance 4 ohms
Sensitivity 89.1 dB 2.83V/1m
Frequency Response 50 - 15 000 Hz Voice Coil
The following 2 users liked this post by 88BLKTransAmGTA:
Buddy (10-08-2023), DynoDave43 (10-13-2023)
#5
Member
Thread Starter
Re: Advice on UQ7 Performance Sound system
Thread
Thread Starter
Forum
Replies
Last Post
SDalt404
Interior Parts Wanted
12
02-10-2010 06:54 PM