When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Needing some advice/help on replacing the speakers in a 91 RS. I thought the factory speakers were blown but upon removing them they look in great shape. The new speakers I am installing are 3 way speakers. I took some jumper wires and hooked up the new speaker to the factory plug and the speaker turns on but isn’t very loud. I can adjust the volume all the way up and down and there is no change in how loud the speaker gets. I also notice that if I jiggle the connector the speaker cuts out/ gets static but that could be because it’s not correctly wired in. When I removed the panels there was some water from the T tops leaking but the plug for the speakers looked to be in good shape. Any body have any suggestions. Thanks!
Sounds more like the internal amp in your radio is bad. A speaker can look perfect and be blown btw. If you adjust volume and there is no change it's most likely the radio.
02-28-2022, 10:38 AM
