Way to tighten the 6x9s?
#1
Senior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2008
Location: Somerset, New Jersey
Posts: 806
Likes: 0
Received 0 Likes
on
0 Posts
Car: 95 Z85 S10, 99 Formula
Engine: 4.3 CPI , LS1
Transmission: NV3500, T56
Axle/Gears: 3.08, 3.42
Way to tighten the 6x9s?
so i put some 6x9 pioneers in the sail panels, and with certain songs one or both speakers rattle. i know its because they're loose, when i put my hand on it it stops.
what i want to know is how can i secure them.
there's screws that are holding them in, but if i try to tighten it too much it'd prob just strip the hole.
any ideas?
what i want to know is how can i secure them.
there's screws that are holding them in, but if i try to tighten it too much it'd prob just strip the hole.
any ideas?
#2
Supreme Member
iTrader: (2)
Join Date: Dec 2000
Location: Buffalo, NY
Posts: 2,361
Likes: 0
Received 2 Likes
on
1 Post
Car: 1984 Trans Am
Engine: LT1
Transmission: T56
Axle/Gears: 10 bolt w/ 4.10 gears
Re: Way to tighten the 6x9s?
If the screw holes are stripped in the sheetmetal, maybe epoxy or weld nuts on the back side of the opening and using machine screws to hold the speakers in. An easier option could be just going with larger sheetmetal screws.
#4
Senior Member
iTrader: (1)
Join Date: Dec 2008
Location: Dallas, Tx
Posts: 600
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 camaro rs
Engine: 305 tbi
Transmission: t5
Axle/Gears: stock
Re: Way to tighten the 6x9s?
very true. but the metal baffles onto which the speakers mount to tend to come loose. b sure to tighten those.
#5
Senior Member
Thread Starter
iTrader: (3)
Join Date: Apr 2008
Location: Somerset, New Jersey
Posts: 806
Likes: 0
Received 0 Likes
on
0 Posts
Car: 95 Z85 S10, 99 Formula
Engine: 4.3 CPI , LS1
Transmission: NV3500, T56
Axle/Gears: 3.08, 3.42
Re: Way to tighten the 6x9s?
thanks all. its nice out today and i'm cleaning out the car so i'll see what i can do with the speakers. i might try the clips first or an epoxy.
Thread
Thread Starter
Forum
Replies
Last Post