Z06/ZR1/ZL1 rear brakes
#1
Junior Member
Thread Starter
Z06/ZR1/ZL1 rear brakes
I have searched and cannot find any details on installing larger rear brakes. Every front brake in the world has been adapted. But it seems that PBR rear brakes are the only thing people run. Has anyone successfully installed larger rear brakes? Does anyone make mounting brackets?
Thanks in advance.
Thanks in advance.
#2
COTM Editor
iTrader: (22)
Join Date: Mar 2001
Posts: 9,929
Likes: 0
Received 1,860 Likes
on
1,274 Posts
Car: '89 Firebird
Engine: 7.0L
Transmission: T56
Re: Z06/ZR1/ZL1 rear brakes
Yes, you can fit a variety of rear brakes but it is spendy and you often loose use of the parking brake. You can view choices at website for www.bigbrakeupgrade.com
#3
Supporter/Moderator
iTrader: (7)
Join Date: Feb 2001
Location: Cincinnati, OH
Posts: 13,243
Likes: 0
Received 391 Likes
on
298 Posts
Car: '90 RS
Engine: 377 LSX
Transmission: Magnum T56
Re: Z06/ZR1/ZL1 rear brakes
The reason you don't see it often is because you really cannot have a fixed caliper on a floating axle (10 bolt). There are kits and brackets out there but you can suffer from pad knock and horrible breaking. Aesthetics aside, a properly setup 4th gen rear brake system is more than enough.
I believe Flynbye sells a C5/C6 floating rear caliper set under C56CONVPLZO6 . Kore3 also sells brackets for fixed caliper set-ups but most are for non 10 bolt rears (9 inch etc).
I believe Flynbye sells a C5/C6 floating rear caliper set under C56CONVPLZO6 . Kore3 also sells brackets for fixed caliper set-ups but most are for non 10 bolt rears (9 inch etc).
#4
Junior Member
Thread Starter
Re: Z06/ZR1/ZL1 rear brakes
Yes, you can fit a variety of rear brakes but it is spendy and you often loose use of the parking brake. You can view choices at website for www.bigbrakeupgrade.com
The reason you don't see it often is because you really cannot have a fixed caliper on a floating axle (10 bolt). There are kits and brackets out there but you can suffer from pad knock and horrible breaking. Aesthetics aside, a properly setup 4th gen rear brake system is more than enough.
I believe Flynbye sells a C5/C6 floating rear caliper set under C56CONVPLZO6 . Kore3 also sells brackets for fixed caliper set-ups but most are for non 10 bolt rears (9 inch etc).
I believe Flynbye sells a C5/C6 floating rear caliper set under C56CONVPLZO6 . Kore3 also sells brackets for fixed caliper set-ups but most are for non 10 bolt rears (9 inch etc).
Last edited by B4CYA; 12-09-2021 at 03:29 PM.
#5
Supreme Member
Join Date: Jul 2006
Location: 212 is up in this Bit@#
Posts: 2,763
Received 739 Likes
on
565 Posts
Car: Resto-Mod 1987 IROC-Z Clone
Engine: Alky fed L92 Vortec Twin-Turbo 6.8L
Transmission: My own built/ design 4L80M
Axle/Gears: Custom 12 bolt (4.10:1)
Re: Z06/ZR1/ZL1 rear brakes
Does anyone offer a Two-Piece Rotor that would help with the Fixed Rear Calipers?
#6
Junior Member
Thread Starter
Re: Z06/ZR1/ZL1 rear brakes
#7
Supreme Member
iTrader: (8)
Join Date: Oct 2001
Location: Il
Posts: 11,723
Received 773 Likes
on
520 Posts
Car: 1989-92 FORMULA350 305 92 Hawkclone
Engine: 4++,350 & 305 CIs
Transmission: 700R4 4800 vig 18th700R4 t56 ZF6 T5
Axle/Gears: 3.70 9"ford alum chunk,dana44,9bolt
Re: Z06/ZR1/ZL1 rear brakes
My Dana 44 rear axles don't float like 10bolt axles do so you should be ok to mount a fixed caliper. Just find or make a bracket.
The following 2 users liked this post by TTOP350:
B4CYA (12-13-2021), vorteciroc (12-09-2021)
Trending Topics
#8
Supreme Member
iTrader: (3)
Join Date: Jan 2004
Location: Las Vegas
Posts: 2,674
Likes: 0
Received 241 Likes
on
181 Posts
Car: 1987 Formula (original owner)
Engine: 305 TPI
Transmission: T5
Axle/Gears: 9-bolt/3.45
Re: Z06/ZR1/ZL1 rear brakes
https://bigbrakeupgrade.com/product/...no-park-brake/
https://bigbrakeupgrade.com/product/...ake-provision/
https://bigbrakeupgrade.com/product/...-brake-9-bolt/
The links are for 9-bolt axles, but Scott modifies them to order, so he can probably make them fit any axle.
The backing plates with the parking brakes are actual C5/C6 assemblies.
https://bigbrakeupgrade.com/product/...ake-provision/
https://bigbrakeupgrade.com/product/...-brake-9-bolt/
The links are for 9-bolt axles, but Scott modifies them to order, so he can probably make them fit any axle.
The backing plates with the parking brakes are actual C5/C6 assemblies.
The following users liked this post:
B4CYA (12-13-2021)
Thread
Thread Starter
Forum
Replies
Last Post