Rear Fexline Specs? Banjo fittings?
08-28-2014, 10:29 AM
#1
Supreme Member
Thread Starter
iTrader: (4)
Join Date: Sep 2010
Location: Double Bratville
Posts: 1,617
Likes: 0
Received 42 Likes
on
31 Posts
Car: '89 Formula
Engine: LS2
Transmission: 4L65E
Axle/Gears: MW 3.42 12 Bolt
Rear Fexline Specs? Banjo fittings?
I have a '89 9 bolt PBR - has two caliper flex lines and 1 chassis to axle hard line flex line (3 total).
I have ordered a new 12 bolt and received a Wilwood D-154 rear kit w/PB. The caliper inlet size is m10 x 1.5.
I had wanted to purchase Goodridge 12254 kit, but it would have the stock banjo bolts of m10 x 1.0.
I plan on re-using the stock hard line and t-block so the Goodridge kit will work fine on that side.
Are the banjo fittings screwed in? In other words, could I purchase separate m10 x 1.5 banjo fittings and swap them on the Goodridge lines?
The recommended line from Wilwood (220-12107) is 18" long! But the attached pic shows the banjo fitting as a simple screw in. Can't find any specs for the Goodridge kits. I would also need to know if the thread size would be the same and only the m10 x 1.5 fitting is different.
I have ordered a new 12 bolt and received a Wilwood D-154 rear kit w/PB. The caliper inlet size is m10 x 1.5.
I had wanted to purchase Goodridge 12254 kit, but it would have the stock banjo bolts of m10 x 1.0.
I plan on re-using the stock hard line and t-block so the Goodridge kit will work fine on that side.Are the banjo fittings screwed in? In other words, could I purchase separate m10 x 1.5 banjo fittings and swap them on the Goodridge lines?
The recommended line from Wilwood (220-12107) is 18" long!
But the attached pic shows the banjo fitting as a simple screw in. Can't find any specs for the Goodridge kits. I would also need to know if the thread size would be the same and only the m10 x 1.5 fitting is different. 
08-28-2014, 01:43 PM
#2
Supreme Member
Thread Starter
iTrader: (4)
Join Date: Sep 2010
Location: Double Bratville
Posts: 1,617
Likes: 0
Received 42 Likes
on
31 Posts
Car: '89 Formula
Engine: LS2
Transmission: 4L65E
Axle/Gears: MW 3.42 12 Bolt
Re: Rear Fexline Specs? Banjo fittings?
Here's another member's photo of the Goodridge lines
08-29-2014, 11:15 AM
#3
Supreme Member
Thread Starter
iTrader: (4)
Join Date: Sep 2010
Location: Double Bratville
Posts: 1,617
Likes: 0
Received 42 Likes
on
31 Posts
Car: '89 Formula
Engine: LS2
Transmission: 4L65E
Axle/Gears: MW 3.42 12 Bolt
Re: Rear Fexline Specs? Banjo fittings?
Goodridge line crimps the banjo fittings on. But I only need new bolts not fittings. So I ordered the kit (I'll sell the front lines, if anyone is interested PM me), and ordered new banjo bolts 992-03-35P. They are m10 x 1.5.
Thread
Thread Starter
Forum
Replies
Last Post
ambainb
Camaros for Sale
11
04-25-2016 09:21 PM