SiCkRs

iTrader: (6)

Since I've seen there's a thread for almost everything I thought we should have one for brake upgrades as well. Unless there isnone already on here. So post your brakes pics and lets see what everyone has .

SiCkRs

iTrader: (6)

Anyone?

fast377

iTrader: (4)

robguitargod1

iTrader: (4)

Started with front and rear LS1 Camaro brakes. $350 for everything shipped to my door.



ugly fronts:




spindle before modding:


front calipers before cleaning/painting:


painting:



making hubs:

robguitargod1

iTrader: (4)

spindles powdercoated:


hubs done:


bracket installed:

done:

robguitargod1

iTrader: (4)

Rears:
LS rears blown apart:

adj proportioning valve installed:


after drums removed:


cutting/drilling:




making parking brake cables:
https://www.thirdgen.org/forums/brak...-ls1-swap.html

done:

SiCkRs

iTrader: (6)

Thanks for posting pics you guys. Waiting to see some one with the 5th gen brakes to see how they did it since im going that route also with the ls1 brake setup as well.

fast377

iTrader: (4)

It's the same as what I posted. CTS-V and 5th gen uses the same caliper (except one has the v logo and the other says camaro...same brembo casting though).

SiCkRs

iTrader: (6)

Yeah i know the calipers are the same but i know the rotors are different but just found out ima just go with z06 rotors and sell my 5th gen stock rotors

fast377

iTrader: (4)

Only difference in the rotors is the Z06 are drilled and the SS rotors need the center bore enlarged.

SiCkRs

iTrader: (6)

So i will be able to use the ss rotors then if i just bore the center hole?

fast377

iTrader: (4)

Yes sir

88fastgta

iTrader: (9)

i will post of pics of my stock rear brakes to ls1 brakes wednesday... swapping the entire rear over...

SiCkRs

iTrader: (6)

Oh ok thanks since in another thread they told me the offset is different as well so that left me thinking if i could use it.

fast377

iTrader: (4)

Ed's kit uses the SS calipers and the SS rotors with the center bore enlarged. There was a thread on here about it a while ago. I'll see if I can find it.

fast377

iTrader: (4)

Here it is: https://www.thirdgen.org/forums/brak...embos-3rd.html

SiCkRs

iTrader: (6)

Alright thanks ill post pics of mine as soon as i get a hub made or when i buy one.

Bradlyj8Z28

iTrader: (2)

KORE3 C6 Z06 brake kit, 14inch rotors with 6 piston calipers

TTOP350

iTrader: (8)

front upgrading of my upgrade


rear upgrade of my upgrade


my 70 Formula getting a upgrade as well

SiCkRs

iTrader: (6)

Nice pics you guys keep them coming

Ed1LE

iTrader: (39)

C5 fronts.

skiroulertx447

not the brakes themselves, but but definitely improved them!

mike_c

iTrader: (13)

LS1 fronts with d/s rotors, EBC red stuff pads and stainless lines. I couldn't be happier with this setup

Realmac4

iTrader: (2)

Modded stock spindle for 1-LE
EB Miller alloy hub
13 in C4 HD rotor
C4 caliper (same as 1-LE but with the line fitting on the side instead of the bottom)









Rear drum to 12 in LS car disc

SiCkRs

iTrader: (6)

test fit of the 19s with 5th gen brakes they look small haha

SiCkRs

iTrader: (6)

Sorry for the bad cellphone quality pic

InfernalVortex

iTrader: (4)

My new LS1 brakes, thanks to mw66nova 's hard work and help to get it done... unfortuantely garbage cell phone cam for the first pic:

KrisW

iTrader: (5)

Subscribed!

Too many good ideas here not to latch on!

//<86TA>\\

iTrader: (14)

im not finished yet, but here my current upgrade. Baer 6s calipers and 14" pcs rotors, Kore3 aluminum hubs ect. all the goodies

SiCkRs

iTrader: (6)

Now those brakes are SWEEET!

88fastgta

iTrader: (9)

not the greatest pic but ls1 brakes in the rear.... just barely clear the stock rims.... stopping power has greatly improved..

pg29

How much did that setup cost you? Those look like they'd make great track day brakes.

91 1LE

iTrader: (1)

Baer 6S calipers with 14" 2pc rotors.

itsMikey

maybe some big brakes are next for me hmmm..stuff looks great guys!

New2Chevy

iTrader: (11)

Here are a few pics of my LS1 brake upgrade

The LS1 calipers dwarf the stockers!

Last pic shows where I had to grind off some of the stock steering stop mount on the inside of the stop mount. I also had to grind off some of the banjo bolt that holds the brake line to the caliper....now the spindle assembly hits the steering stop like it is supposed to.

bigdavesiroc

i'm looking at doing the 2010 ss brakes on my car with 18" rims...any fitment issues and are you guys having to upgrade the master cylinder/booster?

L695speed

Nothing too special and not 100% done yet, but LS1s on Formula 16" concave wheels. Spindles were done by bigbrakeupgrade.com, rest of the parts were sourced from rock auto or Amazon.


One.


Two.


Three.



Still need pads and hard lines, not to mention rear PBR calipers and pads and lines.

IROCtheRoad

Here's a few of my 1LE upgrades. It's not big, but it's as big as I can go :-)

TPI TERR

iTrader: (9)

ctsv version one brembo brakes 14" rotor and with my old wheels . car weighs 3300 lbs.
ls1 t56 a/c , full 4th gen interior, 18" wheels all around they get the job done.

i was looking into the 6piston newer design cuz it looks pimp but well see

rlewi771

Wilwood 4 piston FSL kit through flynbyeperformance.

Twin_Turbo

iTrader: (25)

Slapped this together quickly to go on my gray IROC, the stock brakes are junk..pads are worn, good excuse to swap it all (and the stock brakes look silly behind 19s), it's going on there on Monday.

J-RoKz

sexy what is needed to do the c6 z06 brake swap? i currently have the the c6 z51

Twin_Turbo

iTrader: (25)

z06 calipers, pads, clips, pins and discs. Bolts up to std. C5/6 conversion brackets

Orr89RocZ

iTrader: (20)

Who's changing out their master/boosters for these? I have LS1 rears, C5 13" fronts and brakes still suck...I have an issue somewhere but havent gotten around to checking for it. Thinking master needs bench bled but my booster may not be 100% anymore. I cant tell.





18" C6 wheels. I need more brake to fill that gap Thinking CTSV 14" soon

87350IROC

iTrader: (2)

Or Gen II CTS-V would be even better. Fills out an 18" pretty nice with the Z06 rotor. Or you could even fit the 14.66" CTS-V rotor inside an 18".

J-RoKz

[IMG][/IMG]thanks c6 z06 swap coming soon

400 hp

iTrader: (19)

Ls1 front and rear brake + new wheels..

GTA matt

iTrader: (1)

Don't think I've seen any drag brake setups here, so I'll post mine up. Wilwood dynalite, 4 piston calipers, front and rear.

Front rotors and hubs assembled and safety wired.





Spindle meet caliper and rotor



I didn't weigh the entire assembly before, but you can get the idea. The entire new assembly is lighter then just the old caliper and rotor.





And mounted up



Rerouting lines away from headers and any heat



Waiting on my rear end housing so the rear brakes aren't mounted yet, just assembled the rotors

ZZ3 Z28

Subscribed.

lozantius82

iTrader: (1)

Are those the 1LE rotors? I want to do the swap on my 89 but i want to keep my stock wheels.