Wiring/adding passenger 5th gen power seat
10-06-2023, 11:21 AM
#1
Wiring/adding passenger 5th gen power seat
Looking at adding power 5th gen seats to my IROC. I know that for the driver side, all you need is the power and ground coming off the original chassis harness. You don't have all your other 5th gen only sensors, etc. etc., but the seat movement is all there. Seems like just adding a power and ground connection for the passenger would be pretty simple. Am I thinking this through correctly?
10-07-2023, 08:12 AM
#4
Member
Re: Wiring/adding passenger 5th gen power seat
I did this. All that I did was extend. The power from the driver side
I'd like to get the heated seats working but don't know what's required for wiring/switches etc
I'd like to get the heated seats working but don't know what's required for wiring/switches etc
10-27-2023, 11:24 PM
#6
Re: Wiring/adding passenger 5th gen power seat
When I did mine, I just extended the drivers over to the passenger.
Seems to be working fine, both seats adjust like they are supposed too.
Seems to be working fine, both seats adjust like they are supposed too.
10-28-2023, 08:18 AM
#7
Member
Re: Wiring/adding passenger 5th gen power seat
Just looked through your build thread… those seats look great in there! Did you have to remove the T-tops to get them in? I’ve got a hard top and am looking at 5th/6th gen seats for it, but I’ve only seen them done in T-Top cars.
Trending Topics
10-28-2023, 08:20 AM
#8
Re: Wiring/adding passenger 5th gen power seat
hmm, for the T-Tops. I honestly don't remember if I took them off or not. I may have just to make it easier on me to get them in, but I don't think it would be required. They are big but I think they would fit into a hard top, someone else may need to chime in on that though.
10-28-2023, 04:10 PM
#9
Member
Re: Wiring/adding passenger 5th gen power seat
Thanks! Ya I've really happy with how that all turned out. The seats are so much more comfortable compared to the 3rd and even 4th gen seats I've had in there.
hmm, for the T-Tops. I honestly don't remember if I took them off or not. I may have just to make it easier on me to get them in, but I don't think it would be required. They are big but I think they would fit into a hard top, someone else may need to chime in on that though.
hmm, for the T-Tops. I honestly don't remember if I took them off or not. I may have just to make it easier on me to get them in, but I don't think it would be required. They are big but I think they would fit into a hard top, someone else may need to chime in on that though.
10-28-2023, 10:23 PM
#10
Re: Wiring/adding passenger 5th gen power seat
I'm only 5'9 so to me it seems to be about the same. You can raise these seats a ton, it's kind of funny how high they can go.
but I'm not sure how low they are compared to the stock ones. I'll take a look tomorrow and see what measurements I get.
but I'm not sure how low they are compared to the stock ones. I'll take a look tomorrow and see what measurements I get.
10-29-2023, 04:31 PM
#11
Member
Re: Wiring/adding passenger 5th gen power seat
Thanks in advance! I am just a hair over 6'2", and my head is just about in the headliner in the stock seats. I just don't want to spend a ton of money on Gen 5/6 seats only to have them not work for me.
10-29-2023, 05:09 PM
#12
Member
Re: Wiring/adding passenger 5th gen power seat
I'm 6ft. The 5th gen seats are really tall compared to the stock 3rd gen seats. I have a convertible and my top is always down so it doesn't affect me much, but I do see the difference in where my eyes are compared to the windshield .
I thought about having the seat foam shaved down an inch. My concern is what the seat will feel like afterwards. They are really comfortable right now.
I thought about having the seat foam shaved down an inch. My concern is what the seat will feel like afterwards. They are really comfortable right now.
Thread
Thread Starter
Forum
Replies
Last Post